• TUX



Perl 5 version 20.0 documentation
Recently read



autodie - Replace functions with ones that succeed or die with lexical scope


  1. use autodie; # Recommended: implies 'use autodie qw(:default)'
  2. use autodie qw(:all); # Recommended more: defaults and system/exec.
  3. use autodie qw(open close); # open/close succeed or die
  4. open(my $fh, "<", $filename); # No need to check!
  5. {
  6. no autodie qw(open); # open failures won't die
  7. open(my $fh, "<", $filename); # Could fail silently!
  8. no autodie; # disable all autodies
  9. }


  1. bIlujDI' yIchegh()Qo'; yIHegh()!
  2. It is better to die() than to return() in failure.
  3. -- Klingon programming proverb.

The autodie pragma provides a convenient way to replace functions that normally return false on failure with equivalents that throw an exception on failure.

The autodie pragma has lexical scope, meaning that functions and subroutines altered with autodie will only change their behaviour until the end of the enclosing block, file, or eval.

If system is specified as an argument to autodie , then it uses IPC::System::Simple to do the heavy lifting. See the description of that module for more information.


Exceptions produced by the autodie pragma are members of the autodie::exception class. The preferred way to work with these exceptions under Perl 5.10 is as follows:

  1. use feature qw(switch);
  2. eval {
  3. use autodie;
  4. open(my $fh, '<', $some_file);
  5. my @records = <$fh>;
  6. # Do things with @records...
  7. close($fh);
  8. };
  9. given ($@) {
  10. when (undef) { say "No error"; }
  11. when ('open') { say "Error from open"; }
  12. when (':io') { say "Non-open, IO error."; }
  13. when (':all') { say "All other autodie errors." }
  14. default { say "Not an autodie error at all." }
  15. }

Under Perl 5.8, the given/when structure is not available, so the following structure may be used:

  1. eval {
  2. use autodie;
  3. open(my $fh, '<', $some_file);
  4. my @records = <$fh>;
  5. # Do things with @records...
  6. close($fh);
  7. };
  8. if ($@ and $@->isa('autodie::exception')) {
  9. if ($@->matches('open')) { print "Error from open\n"; }
  10. if ($@->matches(':io' )) { print "Non-open, IO error."; }
  11. } elsif ($@) {
  12. # A non-autodie exception.
  13. }

See autodie::exception for further information on interrogating exceptions.


Autodie uses a simple set of categories to group together similar built-ins. Requesting a category type (starting with a colon) will enable autodie for all built-ins beneath that category. For example, requesting :file will enable autodie for close, fcntl, fileno, open and sysopen.

The categories are currently:

  1. :all
  2. :default
  3. :io
  4. read
  5. seek
  6. sysread
  7. sysseek
  8. syswrite
  9. :dbm
  10. dbmclose
  11. dbmopen
  12. :file
  13. binmode
  14. close
  15. chmod
  16. chown
  17. fcntl
  18. fileno
  19. flock
  20. ioctl
  21. open
  22. sysopen
  23. truncate
  24. :filesys
  25. chdir
  26. closedir
  27. opendir
  28. link
  29. mkdir
  30. readlink
  31. rename
  32. rmdir
  33. symlink
  34. unlink
  35. :ipc
  36. pipe
  37. :msg
  38. msgctl
  39. msgget
  40. msgrcv
  41. msgsnd
  42. :semaphore
  43. semctl
  44. semget
  45. semop
  46. :shm
  47. shmctl
  48. shmget
  49. shmread
  50. :socket
  51. accept
  52. bind
  53. connect
  54. getsockopt
  55. listen
  56. recv
  57. send
  58. setsockopt
  59. shutdown
  60. socketpair
  61. :threads
  62. fork
  63. :system
  64. system
  65. exec

Note that while the above category system is presently a strict hierarchy, this should not be assumed.

A plain use autodie implies use autodie qw(:default) . Note that system and exec are not enabled by default. system requires the optional IPC::System::Simple module to be installed, and enabling system or exec will invalidate their exotic forms. See BUGS below for more details.

The syntax:

  1. use autodie qw(:1.994);

allows the :default list from a particular version to be used. This provides the convenience of using the default methods, but the surety that no behavioral changes will occur if the autodie module is upgraded.

autodie can be enabled for all of Perl's built-ins, including system and exec with:

  1. use autodie qw(:all);



The autodie pragma <does not check calls to print>.


It is not considered an error for flock to return false if it fails due to an EWOULDBLOCK (or equivalent) condition. This means one can still use the common convention of testing the return value of flock when called with the LOCK_NB option:

  1. use autodie;
  2. if ( flock($fh, LOCK_EX | LOCK_NB) ) {
  3. # We have a lock
  4. }

Autodying flock will generate an exception if flock returns false with any other error.


The system built-in is considered to have failed in the following circumstances:

  • The command does not start.

  • The command is killed by a signal.

  • The command returns a non-zero exit value (but see below).

On success, the autodying form of system returns the exit value rather than the contents of $? .

Additional allowable exit values can be supplied as an optional first argument to autodying system:

  1. system( [ 0, 1, 2 ], $cmd, @args); # 0,1,2 are good exit values

autodie uses the IPC::System::Simple module to change system. See its documentation for further information.

Applying autodie to system or exec causes the exotic forms system { $cmd } @args or exec { $cmd } @args to be considered a syntax error until the end of the lexical scope. If you really need to use the exotic form, you can call CORE::system or CORE::exec instead, or use no autodie qw(system exec) before calling the exotic form.


Functions called in list context are assumed to have failed if they return an empty list, or a list consisting only of a single undef element.


  • :void cannot be used with lexical scope

    The :void option is supported in Fatal, but not autodie . To workaround this, autodie may be explicitly disabled until the end of the current block with no autodie . To disable autodie for only a single function (eg, open) use no autodie qw(open) .

    autodie performs no checking of called context to determine whether to throw an exception; the explicitness of error handling with autodie is a deliberate feature.

  • No user hints defined for %s

    You've insisted on hints for user-subroutines, either by pre-pending a ! to the subroutine name itself, or earlier in the list of arguments to autodie . However the subroutine in question does not have any hints available.

See also DIAGNOSTICS in Fatal.


"Used only once" warnings can be generated when autodie or Fatal is used with package filehandles (eg, FILE ). Scalar filehandles are strongly recommended instead.

When using autodie or Fatal with user subroutines, the declaration of those subroutines must appear before the first use of Fatal or autodie , or have been exported from a module. Attempting to use Fatal or autodie on other user subroutines will result in a compile-time error.

Due to a bug in Perl, autodie may "lose" any format which has the same name as an autodying built-in or function.

autodie may not work correctly if used inside a file with a name that looks like a string eval, such as eval (3).

autodie and string eval

Due to the current implementation of autodie , unexpected results may be seen when used near or with the string version of eval. None of these bugs exist when using block eval.

Under Perl 5.8 only, autodie does not propagate into string eval statements, although it can be explicitly enabled inside a string eval.

Under Perl 5.10 only, using a string eval when autodie is in effect can cause the autodie behaviour to leak into the surrounding scope. This can be worked around by using a no autodie at the end of the scope to explicitly remove autodie's effects, or by avoiding the use of string eval.

None of these bugs exist when using block eval. The use of autodie with block eval is considered good practice.


Please report bugs via the CPAN Request Tracker at


If you find this module useful, please consider rating it on the CPAN Ratings service at .

The module author loves to hear how autodie has made your life better (or worse). Feedback can be sent to <>.


Copyright 2008-2009, Paul Fenwick <>


This module is free software. You may distribute it under the same terms as Perl itself.


Fatal, autodie::exception, autodie::hints, IPC::System::Simple

Perl tips, autodie at


Mark Reed and Roland Giersig -- Klingon translators.

See the AUTHORS file for full credits. The latest version of this file can be found at .