perlreguts - Description of the Perl regular expression engine.
This document is an attempt to shine some light on the guts of the regex engine and how it works. The regex engine represents a significant chunk of the perl codebase, but is relatively poorly understood. This document is a meagre attempt at addressing this situation. It is derived from the author's experience, comments in the source code, other papers on the regex engine, feedback on the perl5-porters mail list, and no doubt other places as well.
NOTICE! It should be clearly understood that the behavior and structures discussed in this represents the state of the engine as the author understood it at the time of writing. It is NOT an API definition, it is purely an internals guide for those who want to hack the regex engine, or understand how the regex engine works. Readers of this document are expected to understand perl's regex syntax and its usage in detail. If you want to learn about the basics of Perl's regular expressions, see perlre. And if you want to replace the regex engine with your own, see perlreapi.
There is some debate as to whether to say "regexp" or "regex". In this document we will use the term "regex" unless there is a special reason not to, in which case we will explain why.
When speaking about regexes we need to distinguish between their source code form and their internal form. In this document we will use the term "pattern" when we speak of their textual, source code form, and the term "program" when we speak of their internal representation. These correspond to the terms S-regex and B-regex that Mark Jason Dominus employs in his paper on "Rx" ([1] in REFERENCES).
A regular expression engine is a program that takes a set of constraints specified in a mini-language, and then applies those constraints to a target string, and determines whether or not the string satisfies the constraints. See perlre for a full definition of the language.
In less grandiose terms, the first part of the job is to turn a pattern into something the computer can efficiently use to find the matching point in the string, and the second part is performing the search itself.
To do this we need to produce a program by parsing the text. We then need to execute the program to find the point in the string that matches. And we need to do the whole thing efficiently.
Although it is a bit confusing and some people object to the terminology, it is worth taking a look at a comment that has been in regexp.h for years:
This is essentially a linear encoding of a nondeterministic finite-state machine (aka syntax charts or "railroad normal form" in parsing technology).
The term "railroad normal form" is a bit esoteric, with "syntax diagram/charts", or "railroad diagram/charts" being more common terms. Nevertheless it provides a useful mental image of a regex program: each node can be thought of as a unit of track, with a single entry and in most cases a single exit point (there are pieces of track that fork, but statistically not many), and the whole forms a layout with a single entry and single exit point. The matching process can be thought of as a car that moves along the track, with the particular route through the system being determined by the character read at each possible connector point. A car can fall off the track at any point but it may only proceed as long as it matches the track.
Thus the pattern /foo(?:\w+|\d+|\s+)bar/
can be thought of as the
following chart:
- [start]
- |
- <foo>
- |
- +-----+-----+
- | | |
- <\w+> <\d+> <\s+>
- | | |
- +-----+-----+
- |
- <bar>
- |
- [end]
The truth of the matter is that perl's regular expressions these days are much more complex than this kind of structure, but visualising it this way can help when trying to get your bearings, and it matches the current implementation pretty closely.
To be more precise, we will say that a regex program is an encoding of a graph. Each node in the graph corresponds to part of the original regex pattern, such as a literal string or a branch, and has a pointer to the nodes representing the next component to be matched. Since "node" and "opcode" already have other meanings in the perl source, we will call the nodes in a regex program "regops".
The program is represented by an array of regnode
structures, one or
more of which represent a single regop of the program. Struct
regnode
is the smallest struct needed, and has a field structure which is
shared with all the other larger structures.
The "next" pointers of all regops except BRANCH
implement concatenation;
a "next" pointer with a BRANCH
on both ends of it is connecting two
alternatives. [Here we have one of the subtle syntax dependencies: an
individual BRANCH
(as opposed to a collection of them) is never
concatenated with anything because of operator precedence.]
The operand of some types of regop is a literal string; for others,
it is a regop leading into a sub-program. In particular, the operand
of a BRANCH
node is the first regop of the branch.
NOTE: As the railroad metaphor suggests, this is not a tree
structure: the tail of the branch connects to the thing following the
set of BRANCH
es. It is a like a single line of railway track that
splits as it goes into a station or railway yard and rejoins as it comes
out the other side.
The base structure of a regop is defined in regexp.h as follows:
- struct regnode {
- U8 flags; /* Various purposes, sometimes overridden */
- U8 type; /* Opcode value as specified by regnodes.h */
- U16 next_off; /* Offset in size regnode */
- };
Other larger regnode
-like structures are defined in regcomp.h. They
are almost like subclasses in that they have the same fields as
regnode
, with possibly additional fields following in
the structure, and in some cases the specific meaning (and name)
of some of base fields are overridden. The following is a more
complete description.
regnode_1
regnode_2
regnode_1
structures have the same header, followed by a single
four-byte argument; regnode_2
structures contain two two-byte
arguments instead:
- regnode_1 U32 arg1;
- regnode_2 U16 arg1; U16 arg2;
regnode_string
regnode_string
structures, used for literal strings, follow the header
with a one-byte length and then the string data. Strings are padded on
the end with zero bytes so that the total length of the node is a
multiple of four bytes:
- regnode_string char string[1];
- U8 str_len; /* overrides flags */
regnode_charclass
Bracketed character classes are represented by regnode_charclass
structures, which have a four-byte argument and then a 32-byte (256-bit)
bitmap indicating which characters in the Latin1 range are included in
the class.
- regnode_charclass U32 arg1;
- char bitmap[ANYOF_BITMAP_SIZE];
Various flags whose names begin with ANYOF_
are used for special
situations. Above Latin1 matches and things not known until run-time
are stored in Perl's pprivate structure.
regnode_charclass_posixl
There is also a larger form of a char class structure used to represent
POSIX char classes under /l
matching,
called regnode_charclass_posixl
which has an
additional 32-bit bitmap indicating which POSIX char classes
have been included.
- regnode_charclass_posixl U32 arg1;
- char bitmap[ANYOF_BITMAP_SIZE];
- U32 classflags;
regnodes.h defines an array called regarglen[]
which gives the size
of each opcode in units of size regnode
(4-byte). A macro is used
to calculate the size of an EXACT
node based on its str_len
field.
The regops are defined in regnodes.h which is generated from regcomp.sym by regcomp.pl. Currently the maximum possible number of distinct regops is restricted to 256, with about a quarter already used.
A set of macros makes accessing the fields
easier and more consistent. These include OP()
, which is used to determine
the type of a regnode
-like structure; NEXT_OFF()
, which is the offset to
the next node (more on this later); ARG()
, ARG1()
, ARG2()
, ARG_SET()
,
and equivalents for reading and setting the arguments; and STR_LEN()
,
STRING()
and OPERAND()
for manipulating strings and regop bearing
types.
There are three distinct concepts of "next" in the regex engine, and it is important to keep them clear.
There is the "next regnode" from a given regnode, a value which is rarely useful except that sometimes it matches up in terms of value with one of the others, and that sometimes the code assumes this to always be so.
There is the "next regop" from a given regop/regnode. This is the regop physically located after the current one, as determined by the size of the current regop. This is often useful, such as when dumping the structure we use this order to traverse. Sometimes the code assumes that the "next regnode" is the same as the "next regop", or in other words assumes that the sizeof a given regop type is always going to be one regnode large.
There is the "regnext" from a given regop. This is the regop which
is reached by jumping forward by the value of NEXT_OFF()
,
or in a few cases for longer jumps by the arg1
field of the regnode_1
structure. The subroutine regnext()
handles this transparently.
This is the logical successor of the node, which in some cases, like
that of the BRANCH
regop, has special meaning.
Broadly speaking, performing a match of a string against a pattern involves the following steps:
Where these steps occur in the actual execution of a perl program is
determined by whether the pattern involves interpolating any string
variables. If interpolation occurs, then compilation happens at run time. If it
does not, then compilation is performed at compile time. (The /o modifier changes this,
as does qr// to a certain extent.) The engine doesn't really care that
much.
This code resides primarily in regcomp.c, along with the header files regcomp.h, regexp.h and regnodes.h.
Compilation starts with pregcomp()
, which is mostly an initialisation
wrapper which farms work out to two other routines for the heavy lifting: the
first is reg()
, which is the start point for parsing; the second,
study_chunk()
, is responsible for optimisation.
Initialisation in pregcomp()
mostly involves the creation and data-filling
of a special structure, RExC_state_t
(defined in regcomp.c).
Almost all internally-used routines in regcomp.h take a pointer to one
of these structures as their first argument, with the name pRExC_state
.
This structure is used to store the compilation state and contains many
fields. Likewise there are many macros which operate on this
variable: anything that looks like RExC_xxxx
is a macro that operates on
this pointer/structure.
In this pass the input pattern is parsed in order to calculate how much space is needed for each regop we would need to emit. The size is also used to determine whether long jumps will be required in the program.
This stage is controlled by the macro SIZE_ONLY
being set.
The parse proceeds pretty much exactly as it does during the
construction phase, except that most routines are short-circuited to
change the size field RExC_size
and not do anything else.
Once the size of the program has been determined, the pattern is parsed
again, but this time for real. Now SIZE_ONLY
will be false, and the
actual construction can occur.
reg()
is the start of the parse process. It is responsible for
parsing an arbitrary chunk of pattern up to either the end of the
string, or the first closing parenthesis it encounters in the pattern.
This means it can be used to parse the top-level regex, or any section
inside of a grouping parenthesis. It also handles the "special parens"
that perl's regexes have. For instance when parsing /x(?:foo)y/
reg()
will at one point be called to parse from the "?" symbol up to and
including the ")".
Additionally, reg()
is responsible for parsing the one or more
branches from the pattern, and for "finishing them off" by correctly
setting their next pointers. In order to do the parsing, it repeatedly
calls out to regbranch()
, which is responsible for handling up to the
first | symbol it sees.
regbranch()
in turn calls regpiece()
which
handles "things" followed by a quantifier. In order to parse the
"things", regatom()
is called. This is the lowest level routine, which
parses out constant strings, character classes, and the
various special symbols like $
. If regatom()
encounters a "("
character it in turn calls reg()
.
The routine regtail()
is called by both reg()
and regbranch()
in order to "set the tail pointer" correctly. When executing and
we get to the end of a branch, we need to go to the node following the
grouping parens. When parsing, however, we don't know where the end will
be until we get there, so when we do we must go back and update the
offsets as appropriate. regtail
is used to make this easier.
A subtlety of the parsing process means that a regex like /foo/
is
originally parsed into an alternation with a single branch. It is only
afterwards that the optimiser converts single branch alternations into the
simpler form.
The call graph looks like this:
- reg() # parse a top level regex, or inside of
- # parens
- regbranch() # parse a single branch of an alternation
- regpiece() # parse a pattern followed by a quantifier
- regatom() # parse a simple pattern
- regclass() # used to handle a class
- reg() # used to handle a parenthesised
- # subpattern
- ....
- ...
- regtail() # finish off the branch
- ...
- regtail() # finish off the branch sequence. Tie each
- # branch's tail to the tail of the
- # sequence
- # (NEW) In Debug mode this is
- # regtail_study().
A grammar form might be something like this:
- atom : constant | class
- quant : '*' | '+' | '?' | '{min,max}'
- _branch: piece
- | piece _branch
- | nothing
- branch: _branch
- | _branch '|' branch
- group : '(' branch ')'
- _piece: atom | group
- piece : _piece
- | _piece quant
The implication of the above description is that a pattern containing nested
parentheses will result in a call graph which cycles through reg()
,
regbranch()
, regpiece()
, regatom()
, reg()
, regbranch()
etc
multiple times, until the deepest level of nesting is reached. All the above
routines return a pointer to a regnode
, which is usually the last regnode
added to the program. However, one complication is that reg() returns NULL
for parsing (?:) syntax for embedded modifiers, setting the flag
TRYAGAIN
. The TRYAGAIN
propagates upwards until it is captured, in
some cases by regatom()
, but otherwise unconditionally by
regbranch()
. Hence it will never be returned by regbranch()
to
reg()
. This flag permits patterns such as (?i)+
to be detected as
errors (Quantifier follows nothing in regex; marked by <-- HERE in m/(?i)+
<-- HERE /).
Another complication is that the representation used for the program differs
if it needs to store Unicode, but it's not always possible to know for sure
whether it does until midway through parsing. The Unicode representation for
the program is larger, and cannot be matched as efficiently. (See Unicode and Localisation Support below for more details as to why.) If the pattern
contains literal Unicode, it's obvious that the program needs to store
Unicode. Otherwise, the parser optimistically assumes that the more
efficient representation can be used, and starts sizing on this basis.
However, if it then encounters something in the pattern which must be stored
as Unicode, such as an \x{...}
escape sequence representing a character
literal, then this means that all previously calculated sizes need to be
redone, using values appropriate for the Unicode representation. Currently,
all regular expression constructions which can trigger this are parsed by code
in regatom()
.
To avoid wasted work when a restart is needed, the sizing pass is abandoned
- regatom()
immediately returns NULL, setting the flag RESTART_UTF8
.
(This action is encapsulated using the macro REQUIRE_UTF8
.) This restart
request is propagated up the call chain in a similar fashion, until it is
"caught" in Perl_re_op_compile()
, which marks the pattern as containing
Unicode, and restarts the sizing pass. It is also possible for constructions
within run-time code blocks to turn out to need Unicode representation.,
which is signalled by S_compile_runtime_code()
returning false to
Perl_re_op_compile()
.
The restart was previously implemented using a longjmp
in regatom()
back to a setjmp
in Perl_re_op_compile()
, but this proved to be
problematic as the latter is a large function containing many automatic
variables, which interact badly with the emergent control flow of setjmp
.
In the 5.9.x development version of perl you can use re Debug => 'PARSE'
to see some trace information about the parse process. We will start with some
simple patterns and build up to more complex patterns.
So when we parse /foo/
we see something like the following table. The
left shows what is being parsed, and the number indicates where the next regop
would go. The stuff on the right is the trace output of the graph. The
names are chosen to be short to make it less dense on the screen. 'tsdy'
is a special form of regtail()
which does some extra analysis.
- >foo< 1 reg
- brnc
- piec
- atom
- >< 4 tsdy~ EXACT <foo> (EXACT) (1)
- ~ attach to END (3) offset to 2
The resulting program then looks like:
- 1: EXACT <foo>(3)
- 3: END(0)
As you can see, even though we parsed out a branch and a piece, it was ultimately
only an atom. The final program shows us how things work. We have an EXACT
regop,
followed by an END
regop. The number in parens indicates where the regnext
of
the node goes. The regnext
of an END
regop is unused, as END
regops mean
we have successfully matched. The number on the left indicates the position of
the regop in the regnode array.
Now let's try a harder pattern. We will add a quantifier, so now we have the pattern
/foo+/
. We will see that regbranch()
calls regpiece()
twice.
- >foo+< 1 reg
- brnc
- piec
- atom
- >o+< 3 piec
- atom
- >< 6 tail~ EXACT <fo> (1)
- 7 tsdy~ EXACT <fo> (EXACT) (1)
- ~ PLUS (END) (3)
- ~ attach to END (6) offset to 3
And we end up with the program:
- 1: EXACT <fo>(3)
- 3: PLUS(6)
- 4: EXACT <o>(0)
- 6: END(0)
Now we have a special case. The EXACT
regop has a regnext
of 0. This is
because if it matches it should try to match itself again. The PLUS
regop
handles the actual failure of the EXACT
regop and acts appropriately (going
to regnode 6 if the EXACT
matched at least once, or failing if it didn't).
Now for something much more complex: /x(?:foo*|b[a][rR])(foo|bar)$/
- >x(?:foo*|b... 1 reg
- brnc
- piec
- atom
- >(?:foo*|b[... 3 piec
- atom
- >?:foo*|b[a... reg
- >foo*|b[a][... brnc
- piec
- atom
- >o*|b[a][rR... 5 piec
- atom
- >|b[a][rR])... 8 tail~ EXACT <fo> (3)
- >b[a][rR])(... 9 brnc
- 10 piec
- atom
- >[a][rR])(f... 12 piec
- atom
- >a][rR])(fo... clas
- >[rR])(foo|... 14 tail~ EXACT <b> (10)
- piec
- atom
- >rR])(foo|b... clas
- >)(foo|bar)... 25 tail~ EXACT <a> (12)
- tail~ BRANCH (3)
- 26 tsdy~ BRANCH (END) (9)
- ~ attach to TAIL (25) offset to 16
- tsdy~ EXACT <fo> (EXACT) (4)
- ~ STAR (END) (6)
- ~ attach to TAIL (25) offset to 19
- tsdy~ EXACT <b> (EXACT) (10)
- ~ EXACT <a> (EXACT) (12)
- ~ ANYOF[Rr] (END) (14)
- ~ attach to TAIL (25) offset to 11
- >(foo|bar)$< tail~ EXACT <x> (1)
- piec
- atom
- >foo|bar)$< reg
- 28 brnc
- piec
- atom
- >|bar)$< 31 tail~ OPEN1 (26)
- >bar)$< brnc
- 32 piec
- atom
- >)$< 34 tail~ BRANCH (28)
- 36 tsdy~ BRANCH (END) (31)
- ~ attach to CLOSE1 (34) offset to 3
- tsdy~ EXACT <foo> (EXACT) (29)
- ~ attach to CLOSE1 (34) offset to 5
- tsdy~ EXACT <bar> (EXACT) (32)
- ~ attach to CLOSE1 (34) offset to 2
- >$< tail~ BRANCH (3)
- ~ BRANCH (9)
- ~ TAIL (25)
- piec
- atom
- >< 37 tail~ OPEN1 (26)
- ~ BRANCH (28)
- ~ BRANCH (31)
- ~ CLOSE1 (34)
- 38 tsdy~ EXACT <x> (EXACT) (1)
- ~ BRANCH (END) (3)
- ~ BRANCH (END) (9)
- ~ TAIL (END) (25)
- ~ OPEN1 (END) (26)
- ~ BRANCH (END) (28)
- ~ BRANCH (END) (31)
- ~ CLOSE1 (END) (34)
- ~ EOL (END) (36)
- ~ attach to END (37) offset to 1
Resulting in the program
- 1: EXACT <x>(3)
- 3: BRANCH(9)
- 4: EXACT <fo>(6)
- 6: STAR(26)
- 7: EXACT <o>(0)
- 9: BRANCH(25)
- 10: EXACT <ba>(14)
- 12: OPTIMIZED (2 nodes)
- 14: ANYOF[Rr](26)
- 25: TAIL(26)
- 26: OPEN1(28)
- 28: TRIE-EXACT(34)
- [StS:1 Wds:2 Cs:6 Uq:5 #Sts:7 Mn:3 Mx:3 Stcls:bf]
- <foo>
- <bar>
- 30: OPTIMIZED (4 nodes)
- 34: CLOSE1(36)
- 36: EOL(37)
- 37: END(0)
Here we can see a much more complex program, with various optimisations in
play. At regnode 10 we see an example where a character class with only
one character in it was turned into an EXACT
node. We can also see where
an entire alternation was turned into a TRIE-EXACT
node. As a consequence,
some of the regnodes have been marked as optimised away. We can see that
the $
symbol has been converted into an EOL
regop, a special piece of
code that looks for \n
or the end of the string.
The next pointer for BRANCH
es is interesting in that it points at where
execution should go if the branch fails. When executing, if the engine
tries to traverse from a branch to a regnext
that isn't a branch then
the engine will know that the entire set of branches has failed.
The regular expression engine can be a weighty tool to wield. On long strings and complex patterns it can end up having to do a lot of work to find a match, and even more to decide that no match is possible. Consider a situation like the following pattern.
- 'ababababababababababab' =~ /(a|b)*z/
The (a|b)*
part can match at every char in the string, and then fail
every time because there is no z
in the string. So obviously we can
avoid using the regex engine unless there is a z
in the string.
Likewise in a pattern like:
- /foo(\w+)bar/
In this case we know that the string must contain a foo
which must be
followed by bar
. We can use Fast Boyer-Moore matching as implemented
in fbm_instr()
to find the location of these strings. If they don't exist
then we don't need to resort to the much more expensive regex engine.
Even better, if they do exist then we can use their positions to
reduce the search space that the regex engine needs to cover to determine
if the entire pattern matches.
There are various aspects of the pattern that can be used to facilitate optimisations along these lines:
Another form of optimisation that can occur is the post-parse "peep-hole"
optimisation, where inefficient constructs are replaced by more efficient
constructs. The TAIL
regops which are used during parsing to mark the end
of branches and the end of groups are examples of this. These regops are used
as place-holders during construction and "always match" so they can be
"optimised away" by making the things that point to the TAIL
point to the
thing that TAIL
points to, thus "skipping" the node.
Another optimisation that can occur is that of "EXACT
merging" which is
where two consecutive EXACT
nodes are merged into a single
regop. An even more aggressive form of this is that a branch
sequence of the form EXACT BRANCH ... EXACT
can be converted into a
TRIE-EXACT
regop.
All of this occurs in the routine study_chunk()
which uses a special
structure scan_data_t
to store the analysis that it has performed, and
does the "peep-hole" optimisations as it goes.
The code involved in study_chunk()
is extremely cryptic. Be careful. :-)
Execution of a regex generally involves two phases, the first being finding the start point in the string where we should match from, and the second being running the regop interpreter.
If we can tell that there is no valid start point then we don't bother running the interpreter at all. Likewise, if we know from the analysis phase that we cannot detect a short-cut to the start position, we go straight to the interpreter.
The two entry points are re_intuit_start()
and pregexec()
. These routines
have a somewhat incestuous relationship with overlap between their functions,
and pregexec()
may even call re_intuit_start()
on its own. Nevertheless
other parts of the perl source code may call into either, or both.
Execution of the interpreter itself used to be recursive, but thanks to the efforts of Dave Mitchell in the 5.9.x development track, that has changed: now an internal stack is maintained on the heap and the routine is fully iterative. This can make it tricky as the code is quite conservative about what state it stores, with the result that two consecutive lines in the code can actually be running in totally different contexts due to the simulated recursion.
re_intuit_start()
is responsible for handling start points and no-match
optimisations as determined by the results of the analysis done by
study_chunk()
(and described in Peep-hole Optimisation and Analysis).
The basic structure of this routine is to try to find the start- and/or end-points of where the pattern could match, and to ensure that the string is long enough to match the pattern. It tries to use more efficient methods over less efficient methods and may involve considerable cross-checking of constraints to find the place in the string that matches. For instance it may try to determine that a given fixed string must be not only present but a certain number of chars before the end of the string, or whatever.
It calls several other routines, such as fbm_instr()
which does
Fast Boyer Moore matching and find_byclass()
which is responsible for
finding the start using the first mandatory regop in the program.
When the optimisation criteria have been satisfied, reg_try()
is called
to perform the match.
pregexec()
is the main entry point for running a regex. It contains
support for initialising the regex interpreter's state, running
re_intuit_start()
if needed, and running the interpreter on the string
from various start positions as needed. When it is necessary to use
the regex interpreter pregexec()
calls regtry()
.
regtry()
is the entry point into the regex interpreter. It expects
as arguments a pointer to a regmatch_info
structure and a pointer to
a string. It returns an integer 1 for success and a 0 for failure.
It is basically a set-up wrapper around regmatch()
.
regmatch
is the main "recursive loop" of the interpreter. It is
basically a giant switch statement that implements a state machine, where
the possible states are the regops themselves, plus a number of additional
intermediate and failure states. A few of the states are implemented as
subroutines but the bulk are inline code.
When dealing with strings containing characters that cannot be represented using an eight-bit character set, perl uses an internal representation that is a permissive version of Unicode's UTF-8 encoding[2]. This uses single bytes to represent characters from the ASCII character set, and sequences of two or more bytes for all other characters. (See perlunitut for more information about the relationship between UTF-8 and perl's encoding, utf8. The difference isn't important for this discussion.)
No matter how you look at it, Unicode support is going to be a pain in a
regex engine. Tricks that might be fine when you have 256 possible
characters often won't scale to handle the size of the UTF-8 character
set. Things you can take for granted with ASCII may not be true with
Unicode. For instance, in ASCII, it is safe to assume that
sizeof(char1) == sizeof(char2)
, but in UTF-8 it isn't. Unicode case folding is
vastly more complex than the simple rules of ASCII, and even when not
using Unicode but only localised single byte encodings, things can get
tricky (for example, LATIN SMALL LETTER SHARP S (U+00DF, ß)
should match 'SS' in localised case-insensitive matching).
Making things worse is that UTF-8 support was a later addition to the regex engine (as it was to perl) and this necessarily made things a lot more complicated. Obviously it is easier to design a regex engine with Unicode support in mind from the beginning than it is to retrofit it to one that wasn't.
Nearly all regops that involve looking at the input string have two cases, one for UTF-8, and one not. In fact, it's often more complex than that, as the pattern may be UTF-8 as well.
Care must be taken when making changes to make sure that you handle UTF-8 properly, both at compile time and at execution time, including when the string and pattern are mismatched.
The regexp
structure described in perlreapi is common to all
regex engines. Two of its fields are intended for the private use
of the regex engine that compiled the pattern. These are the
intflags
and pprivate members. The pprivate
is a void pointer to
an arbitrary structure whose use and management is the responsibility
of the compiling engine. perl will never modify either of these
values. In the case of the stock engine the structure pointed to by
pprivate
is called regexp_internal
.
Its pprivate
and intflags
fields contain data
specific to each engine.
There are two structures used to store a compiled regular expression.
One, the regexp
structure described in perlreapi is populated by
the engine currently being. used and some of its fields read by perl to
implement things such as the stringification of qr//.
The other structure is pointed to by the regexp
struct's
pprivate
and is in addition to intflags
in the same struct
considered to be the property of the regex engine which compiled the
regular expression;
The regexp structure contains all the data that perl needs to be aware of to properly work with the regular expression. It includes data about optimisations that perl can use to determine if the regex engine should really be used, and various other control info that is needed to properly execute patterns in various contexts such as is the pattern anchored in some way, or what flags were used during the compile, or whether the program contains special constructs that perl needs to be aware of.
In addition it contains two fields that are intended for the private use
of the regex engine that compiled the pattern. These are the intflags
and pprivate members. The pprivate
is a void pointer to an arbitrary
structure whose use and management is the responsibility of the compiling
engine. perl will never modify either of these values.
As mentioned earlier, in the case of the default engines, the pprivate
will be a pointer to a regexp_internal structure which holds the compiled
program and any additional data that is private to the regex engine
implementation.
pprivate
structureThe following structure is used as the pprivate
struct by perl's
regex engine. Since it is specific to perl it is only of curiosity
value to other engine implementations.
- typedef struct regexp_internal {
- U32 *offsets; /* offset annotations 20001228 MJD
- * data about mapping the program to
- * the string*/
- regnode *regstclass; /* Optional startclass as identified or
- * constructed by the optimiser */
- struct reg_data *data; /* Additional miscellaneous data used
- * by the program. Used to make it
- * easier to clone and free arbitrary
- * data that the regops need. Often the
- * ARG field of a regop is an index
- * into this structure */
- regnode program[1]; /* Unwarranted chumminess with
- * compiler. */
- } regexp_internal;
offsets
Offsets holds a mapping of offset in the program
to offset in the precomp
string. This is only used by ActiveState's
visual regex debugger.
regstclass
Special regop that is used by re_intuit_start()
to check if a pattern
can match at a certain position. For instance if the regex engine knows
that the pattern must start with a 'Z' then it can scan the string until
it finds one and then launch the regex engine from there. The routine
that handles this is called find_by_class()
. Sometimes this field
points at a regop embedded in the program, and sometimes it points at
an independent synthetic regop that has been constructed by the optimiser.
data
This field points at a reg_data
structure, which is defined as follows
- struct reg_data {
- U32 count;
- U8 *what;
- void* data[1];
- };
This structure is used for handling data structures that the regex engine needs to handle specially during a clone or free operation on the compiled product. Each element in the data array has a corresponding element in the what array. During compilation regops that need special structures stored will add an element to each array using the add_data() routine and then store the index in the regop.
program
Compiled program. Inlined into the structure so the entire struct can be treated as a single blob.
by Yves Orton, 2006.
With excerpts from Perl, and contributions and suggestions from Ronald J. Kimball, Dave Mitchell, Dominic Dunlop, Mark Jason Dominus, Stephen McCamant, and David Landgren.
Same terms as Perl.