overload - Package for overloading Perl operations
- package SomeThing;
- use overload
- '+' => \&myadd,
- '-' => \&mysub;
- # etc
- ...
- package main;
- $a = new SomeThing 57;
- $b=5+$a;
- ...
- if (overload::Overloaded $b) {...}
- ...
- $strval = overload::StrVal $b;
The compilation directive
- package Number;
- use overload
- "+" => \&add,
- "*=" => "muas";
declares function Number::add() for addition, and method muas() in
the "class" Number
(or one of its base classes)
for the assignment form *=
of multiplication.
Arguments of this directive come in (key, value) pairs. Legal values
are values legal inside a &{ ... }
call, so the name of a
subroutine, a reference to a subroutine, or an anonymous subroutine
will all work. Note that values specified as strings are
interpreted as methods, not subroutines. Legal keys are listed below.
The subroutine add
will be called to execute $a+$b
if $a
is a reference to an object blessed into the package Number
, or if $a is
not an object from a package with defined mathemagic addition, but $b is a
reference to a Number
. It can also be called in other situations, like
$a+=7
, or $a++
. See MAGIC AUTOGENERATION. (Mathemagical
methods refer to methods triggered by an overloaded mathematical
operator.)
Since overloading respects inheritance via the @ISA hierarchy, the
above declaration would also trigger overloading of +
and *=
in
all the packages which inherit from Number
.
The functions specified in the use overload ...
directive are called
with three (in one particular case with four, see Last Resort)
arguments. If the corresponding operation is binary, then the first
two arguments are the two arguments of the operation. However, due to
general object calling conventions, the first argument should always be
an object in the package, so in the situation of 7+$a
, the
order of the arguments is interchanged. It probably does not matter
when implementing the addition method, but whether the arguments
are reversed is vital to the subtraction method. The method can
query this information by examining the third argument, which can take
three different values:
the order of arguments is as in the current operation.
the arguments are reversed.
undef
the current operation is an assignment variant (as in
$a+=7
), but the usual function is called instead. This additional
information can be used to generate some optimizations. Compare
Calling Conventions for Mutators.
Unary operation are considered binary operations with the second
argument being undef. Thus the functions that overloads {"++"}
is called with arguments ($a,undef,'')
when $a++ is executed.
Two types of mutators have different calling conventions:
++
and --
The routines which implement these operators are expected to actually mutate their arguments. So, assuming that $obj is a reference to a number,
is an appropriate implementation of overloaded ++
. Note that
- sub incr { ++$ {$_[0]} ; shift }
is OK if used with preincrement and with postincrement. (In the case of postincrement a copying will be performed, see Copy Constructor.)
x=
and other assignment versions
There is nothing special about these methods. They may change the value of their arguments, and may leave it as is. The result is going to be assigned to the value in the left-hand-side if different from this value.
This allows for the same method to be used as overloaded +=
and
+
. Note that this is allowed, but not recommended, since by the
semantic of Fallback Perl will call the method for +
anyway,
if +=
is not overloaded.
Warning. Due to the presence of assignment versions of operations,
routines which may be called in assignment context may create
self-referential structures. Currently Perl will not free self-referential
structures until cycles are explicitly
broken. You may get problems
when traversing your structures too.
Say,
is asking for trouble, since for code $obj += $foo
the subroutine
is called as $obj = add($obj, $foo, undef)
, or $obj = [\$obj,
\$foo]
. If using such a subroutine is an important optimization, one
can overload +=
explicitly by a non-"optimized" version, or switch
to non-optimized version if not defined $_[2]
(see
Calling Conventions for Binary Operations).
Even if no explicit assignment-variants of operators are present in
the script, they may be generated by the optimizer. Say, ",$obj,"
or
',' . $obj . ','
may be both optimized to
- my $tmp = ',' . $obj; $tmp .= ',';
The following symbols can be specified in use overload
directive:
- "+", "+=", "-", "-=", "*", "*=", "/", "/=", "%", "%=",
- "**", "**=", "<<", "<<=", ">>", ">>=", "x", "x=", ".", ".=",
For these operations a substituted non-assignment variant can be called if
the assignment variant is not available. Methods for operations +
,
-
, +=
, and -=
can be called to automatically generate
increment and decrement methods. The operation -
can be used to
autogenerate missing methods for unary minus or abs.
See MAGIC AUTOGENERATION, Calling Conventions for Mutators and Calling Conventions for Binary Operations) for details of these substitutions.
- "<", "<=", ">", ">=", "==", "!=", "<=>",
- "lt", "le", "gt", "ge", "eq", "ne", "cmp",
If the corresponding "spaceship" variant is available, it can be
used to substitute for the missing operation. During sorting
arrays, cmp
is used to compare values subject to use overload
.
- "&", "^", "|", "neg", "!", "~",
neg
stands for unary minus. If the method for neg
is not
specified, it can be autogenerated using the method for
subtraction. If the method for !
is not specified, it can be
autogenerated using the methods for bool
, or ""
, or 0+
.
- "++", "--",
If undefined, addition and subtraction methods can be used instead. These operations are called both in prefix and postfix form.
- "atan2", "cos", "sin", "exp", "abs", "log", "sqrt", "int"
If abs is unavailable, it can be autogenerated using methods
for "<" or "<=>" combined with either unary minus or subtraction.
Note that traditionally the Perl function int rounds to 0, thus for
floating-point-like types one should follow the same semantic. If
int is unavailable, it can be autogenerated using the overloading of
0+
.
- 'bool', '""', '0+',
If one or two of these operations are not overloaded, the remaining ones can
be used instead. bool
is used in the flow control operators
(like while
) and for the ternary ?: operation. These functions can
return any arbitrary Perl value. If the corresponding operation for this value
is overloaded too, that operation will be called again with this value.
As a special case if the overload returns the object itself then it will
be used directly. An overloaded conversion returning the object is
probably a bug, because you're likely to get something that looks like
YourPackage=HASH(0x8172b34)
.
- "<>"
If not overloaded, the argument will be converted to a filehandle or
glob (which may require a stringification). The same overloading
happens both for the read-filehandle syntax <$var>
and
globbing syntax <${var}>
.
BUGS Even in list context, the iterator is currently called only once and with scalar context.
- '${}', '@{}', '%{}', '&{}', '*{}'.
If not overloaded, the argument will be dereferenced as is, thus should be of correct type. These functions should return a reference of correct type, or another object with overloaded dereferencing.
As a special case if the overload returns the object itself then it will be used directly (provided it is the correct type).
The dereference operators must be specified explicitly they will not be passed to "nomethod".
- "nomethod", "fallback", "=",
See Fallback for an explanation of when a missing method can be autogenerated.
A computer-readable form of the above table is available in the hash %overload::ops, with values being space-separated lists of names:
- with_assign => '+ - * / % ** << >> x .',
- assign => '+= -= *= /= %= **= <<= >>= x= .=',
- num_comparison => '< <= > >= == !=',
- '3way_comparison'=> '<=> cmp',
- str_comparison => 'lt le gt ge eq ne',
- binary => '& | ^',
- unary => 'neg ! ~',
- mutators => '++ --',
- func => 'atan2 cos sin exp abs log sqrt',
- conversion => 'bool "" 0+',
- iterators => '<>',
- dereferencing => '${} @{} %{} &{} *{}',
- special => 'nomethod fallback ='
Inheritance interacts with overloading in two ways.
use overload
directive
If value
in
- use overload key => value;
is a string, it is interpreted as a method name.
Any class derived from an overloaded class is also overloaded. The set of overloaded methods is the union of overloaded methods of all the ancestors. If some method is overloaded in several ancestor, then which description will be used is decided by the usual inheritance rules:
If A
inherits from B
and C
(in this order), B
overloads
+
with \&D::plus_sub
, and C
overloads +
by "plus_meth"
,
then the subroutine D::plus_sub
will be called to implement
operation +
for an object in package A
.
Note that since the value of the fallback
key is not a subroutine,
its inheritance is not governed by the above rules. In the current
implementation, the value of fallback
in the first overloaded
ancestor is used, but this is accidental and subject to change.
use overload
Three keys are recognized by Perl that are not covered by the above description.
"nomethod"
should be followed by a reference to a function of four
parameters. If defined, it is called when the overloading mechanism
cannot find a method for some operation. The first three arguments of
this function coincide with the arguments for the corresponding method if
it were found, the fourth argument is the symbol
corresponding to the missing method. If several methods are tried,
the last one is used. Say, 1-$a
can be equivalent to
- &nomethodMethod($a,1,1,"-")
if the pair "nomethod" => "nomethodMethod"
was specified in the
use overload
directive.
The "nomethod"
mechanism is not used for the dereference operators
( ${} @{} %{} &{} *{} ).
If some operation cannot be resolved, and there is no function
assigned to "nomethod"
, then an exception will be raised via die()--
unless "fallback"
was specified as a key in use overload
directive.
The key "fallback"
governs what to do if a method for a particular
operation is not found. Three different cases are possible depending on
the value of "fallback"
:
undef
Perl tries to use a
substituted method (see MAGIC AUTOGENERATION). If this fails, it
then tries to calls "nomethod"
value; if missing, an exception
will be raised.
The same as for the undef value, but no exception is raised. Instead,
it silently reverts to what it would have done were there no use overload
present.
No autogeneration is tried. Perl tries to call
"nomethod"
value, and if this is missing, raises an exception.
Note. "fallback"
inheritance via @ISA is not carved in stone
yet, see Inheritance and overloading.
The value for "="
is a reference to a function with three
arguments, i.e., it looks like the other values in use
overload
. However, it does not overload the Perl assignment
operator. This would go against Camel hair.
This operation is called in the situations when a mutator is applied to a reference that shares its object with some other reference, such as
- $a=$b;
- ++$a;
To make this change $a and not change $b, a copy of $$a
is made,
and $a is assigned a reference to this new object. This operation is
done during execution of the ++$a
, and not during the assignment,
(so before the increment $$a
coincides with $$b
). This is only
done if ++
is expressed via a method for '++'
or '+='
(or
nomethod
). Note that if this operation is expressed via '+'
a nonmutator, i.e., as in
- $a=$b;
- $a=$a+1;
then $a
does not reference a new copy of $$a
, since $$a does not
appear as lvalue when the above code is executed.
If the copy constructor is required during the execution of some mutator,
but a method for '='
was not specified, it can be autogenerated as a
string copy if the object is a plain scalar.
The actually executed code for
- $a=$b;
- Something else which does not modify $a or $b....
- ++$a;
may be
- $a=$b;
- Something else which does not modify $a or $b....
- $a = $a->clone(undef,"");
- $a->incr(undef,"");
if $b was mathemagical, and '++'
was overloaded with \&incr
,
'='
was overloaded with \&clone
.
Same behaviour is triggered by $b = $a++
, which is consider a synonym for
$b = $a; ++$a
.
If a method for an operation is not found, and the value for "fallback"
is
TRUE or undefined, Perl tries to autogenerate a substitute method for
the missing operation based on the defined operations. Autogenerated method
substitutions are possible for the following operations:
$a+=$b
can use the method for "+"
if the method for "+="
is not defined.
String, numeric, and boolean conversion are calculated in terms of one another if not all of them are defined.
The ++$a
operation can be expressed in terms of $a+=1
or $a+1
,
and $a--
in terms of $a-=1
and $a-1
.
abs($a)
can be expressed in terms of $a<0
and -$a
(or 0-$a
).
can be expressed in terms of subtraction.
!
and not
can be expressed in terms of boolean conversion, or
string or numerical conversion.
can be expressed in terms of string conversion.
can be expressed in terms of its "spaceship" counterpart: either
<=>
or cmp
:
- <, >, <=, >=, ==, != in terms of <=>
- lt, gt, le, ge, eq, ne in terms of cmp
- <> in terms of builtin operations
- ${} @{} %{} &{} *{} in terms of builtin operations
can be expressed in terms of an assignment to the dereferenced value, if this value is a scalar and not a reference.
The restriction for the comparison operation is that even if, for example,
`cmp
' should return a blessed reference, the autogenerated `lt
'
function will produce only a standard logical value based on the
numerical value of the result of `cmp
'. In particular, a working
numeric conversion is needed in this case (possibly expressed in terms of
other conversions).
Similarly, .=
and x=
operators lose their mathemagical properties
if the string conversion substitution is applied.
When you chop() a mathemagical object it is promoted to a string and its mathemagical properties are lost. The same can happen with other operations as well.
Since all use directives are executed at compile-time, the only way to
change overloading during run-time is to
- eval 'use overload "+" => \&addmethod';
You can also use
- eval 'no overload "+", "--", "<="';
though the use of these constructs during run-time is questionable.
Package overload.pm
provides the following public functions:
Gives string value of arg
as in absence of stringify overloading. If you
are using this to get the address of a reference (useful for checking if two
references point to the same thing) then you may be better off using
Scalar::Util::refaddr()
, which is faster.
Returns true if arg
is subject to overloading of some operations.
Returns undef or a reference to the method that implements op
.
For some applications, the Perl parser mangles constants too much.
It is possible to hook into this process via overload::constant()
and overload::remove_constant()
functions.
These functions take a hash as an argument. The recognized keys of this hash are:
to overload integer constants,
to overload floating point constants,
to overload octal and hexadecimal constants,
to overload q-quoted strings, constant pieces of qq- and qx-quoted
strings and here-documents,
to overload constant pieces of regular expressions.
The corresponding values are references to functions which take three arguments:
the first one is the initial string form of the constant, the second one
is how Perl interprets this constant, the third one is how the constant is used.
Note that the initial string form does not
contain string delimiters, and has backslashes in backslash-delimiter
combinations stripped (thus the value of delimiter is not relevant for
processing of this string). The return value of this function is how this
constant is going to be interpreted by Perl. The third argument is undefined
unless for overloaded q- and qr- constants, it is q in single-quote
context (comes from strings, regular expressions, and single-quote HERE
documents), it is tr for arguments of tr/y operators,
it is s for right-hand side of s-operator, and it is qq otherwise.
Since an expression "ab$cd,,"
is just a shortcut for 'ab' . $cd . ',,'
,
it is expected that overloaded constant strings are equipped with reasonable
overloaded catenation operator, otherwise absurd results will result.
Similarly, negative numbers are considered as negations of positive constants.
Note that it is probably meaningless to call the functions overload::constant() and overload::remove_constant() from anywhere but import() and unimport() methods. From these methods they may be called as
BUGS Currently overloaded-ness of constants does not propagate
into eval '...'
.
What follows is subject to change RSN.
The table of methods for all operations is cached in magic for the
symbol table hash for the package. The cache is invalidated during
processing of use overload
, no overload
, new function
definitions, and changes in @ISA. However, this invalidation remains
unprocessed until the next blessing into the package. Hence if you
want to change overloading structure dynamically, you'll need an
additional (fake) blessing to update the table.
(Every SVish thing has a magic queue, and magic is an entry in that queue. This is how a single variable may participate in multiple forms of magic simultaneously. For instance, environment variables regularly have two forms at once: their %ENV magic and their taint magic. However, the magic which implements overloading is applied to the stashes, which are rarely used directly, thus should not slow down Perl.)
If an object belongs to a package using overload, it carries a special flag. Thus the only speed penalty during arithmetic operations without overloading is the checking of this flag.
In fact, if use overload
is not present, there is almost no overhead
for overloadable operations, so most programs should not suffer
measurable performance penalties. A considerable effort was made to
minimize the overhead when overload is used in some package, but the
arguments in question do not belong to packages using overload. When
in doubt, test your speed with use overload
and without it. So far
there have been no reports of substantial speed degradation if Perl is
compiled with optimization turned on.
There is no size penalty for data if overload is not used. The only
size penalty if overload is used in some package is that all the
packages acquire a magic during the next blessing into the
package. This magic is three-words-long for packages without
overloading, and carries the cache table if the package is overloaded.
Copying ($a=$b
) is shallow; however, a one-level-deep copying is
carried out before any operation that can imply an assignment to the
object $a (or $b) refers to, like $a++
. You can override this
behavior by defining your own copy constructor (see Copy Constructor).
It is expected that arguments to methods that are not explicitly supposed to be changed are constant (but this is not enforced).
One may wonder why the semantic of overloaded =
is so counter intuitive.
If it looks counter intuitive to you, you are subject to a metaphor
clash.
Here is a Perl object metaphor:
object is a reference to blessed data
and an arithmetic metaphor:
object is a thing by itself.
The main problem of overloading =
is the fact that these metaphors
imply different actions on the assignment $a = $b
if $a and $b are
objects. Perl-think implies that $a becomes a reference to whatever
$b was referencing. Arithmetic-think implies that the value of "object"
$a is changed to become the value of the object $b, preserving the fact
that $a and $b are separate entities.
The difference is not relevant in the absence of mutators. After
a Perl-way assignment an operation which mutates the data referenced by $a
would change the data referenced by $b too. Effectively, after
$a = $b
values of $a and $b become indistinguishable.
On the other hand, anyone who has used algebraic notation knows the expressive power of the arithmetic metaphor. Overloading works hard to enable this metaphor while preserving the Perlian way as far as possible. Since it is not possible to freely mix two contradicting metaphors, overloading allows the arithmetic way to write things as far as all the mutators are called via overloaded access only. The way it is done is described in Copy Constructor.
If some mutator methods are directly applied to the overloaded values, one may need to explicitly unlink other values which references the same value:
- $a = new Data 23;
- ...
- $b = $a; # $b is "linked" to $a
- ...
- $a = $a->clone; # Unlink $b from $a
- $a->increment_by(4);
Note that overloaded access makes this transparent:
- $a = new Data 23;
- $b = $a; # $b is "linked" to $a
- $a += 4; # would unlink $b automagically
However, it would not make
- $a = new Data 23;
- $a = 4; # Now $a is a plain 4, not 'Data'
preserve "objectness" of $a. But Perl has a way to make assignments to an object do whatever you want. It is just not the overload, but tie()ing interface (see tie). Adding a FETCH() method which returns the object itself, and STORE() method which changes the value of the object, one can reproduce the arithmetic metaphor in its completeness, at least for variables which were tie()d from the start.
(Note that a workaround for a bug may be needed, see BUGS.)
Please add examples to what follows!
Put this in two_face.pm in your Perl library directory:
Use it as follows:
(The second line creates a scalar which has both a string value, and a numeric value.) This prints:
- seven=vii, seven=7, eight=8
- seven contains `i'
Suppose you want to create an object which is accessible as both an array reference and a hash reference, similar to the pseudo-hash builtin Perl type. Let's make it better than a pseudo-hash by allowing index 0 to be treated as a normal element.
- package two_refs;
- use overload '%{}' => \&gethash, '@{}' => sub { $ {shift()} };
- sub new {
- my $p = shift;
- bless \ [@_], $p;
- }
- sub gethash {
- my %h;
- my $self = shift;
- tie %h, ref $self, $self;
- \%h;
- }
- sub TIEHASH { my $p = shift; bless \ shift, $p }
- my %fields;
- my $i = 0;
- $fields{$_} = $i++ foreach qw{zero one two three};
- sub STORE {
- my $self = ${shift()};
- my $key = $fields{shift()};
- defined $key or die "Out of band access";
- $$self->[$key] = shift;
- }
- sub FETCH {
- my $self = ${shift()};
- my $key = $fields{shift()};
- defined $key or die "Out of band access";
- $$self->[$key];
- }
Now one can access an object using both the array and hash syntax:
Note several important features of this example. First of all, the
actual type of $bar is a scalar reference, and we do not overload
the scalar dereference. Thus we can get the actual non-overloaded
contents of $bar by just using $$bar
(what we do in functions which
overload dereference). Similarly, the object returned by the
TIEHASH() method is a scalar reference.
Second, we create a new tied hash each time the hash syntax is used. This allows us not to worry about a possibility of a reference loop, which would lead to a memory leak.
Both these problems can be cured. Say, if we want to overload hash dereference on a reference to an object which is implemented as a hash itself, the only problem one has to circumvent is how to access this actual hash (as opposed to the virtual hash exhibited by the overloaded dereference operator). Here is one possible fetching routine:
To remove creation of the tied hash on each access, one may an extra level of indirection which allows a non-circular structure of references:
- package two_refs1;
- use overload '%{}' => sub { ${shift()}->[1] },
- '@{}' => sub { ${shift()}->[0] };
- sub new {
- my $p = shift;
- my $a = [@_];
- my %h;
- tie %h, $p, $a;
- bless \ [$a, \%h], $p;
- }
- sub gethash {
- my %h;
- my $self = shift;
- tie %h, ref $self, $self;
- \%h;
- }
- sub TIEHASH { my $p = shift; bless \ shift, $p }
- my %fields;
- my $i = 0;
- $fields{$_} = $i++ foreach qw{zero one two three};
- sub STORE {
- my $a = ${shift()};
- my $key = $fields{shift()};
- defined $key or die "Out of band access";
- $a->[$key] = shift;
- }
- sub FETCH {
- my $a = ${shift()};
- my $key = $fields{shift()};
- defined $key or die "Out of band access";
- $a->[$key];
- }
Now if $baz is overloaded like this, then $baz
is a reference to a
reference to the intermediate array, which keeps a reference to an
actual array, and the access hash. The tie()ing object for the access
hash is a reference to a reference to the actual array, so
There are no loops of references.
Both "objects" which are blessed into the class two_refs1
are
references to a reference to an array, thus references to a scalar.
Thus the accessor expression $$foo->[$ind]
involves no
overloaded operations.
Put this in symbolic.pm in your Perl library directory:
This module is very unusual as overloaded modules go: it does not
provide any usual overloaded operators, instead it provides the Last Resort operator nomethod
. In this example the corresponding
subroutine returns an object which encapsulates operations done over
the objects: new symbolic 3
contains ['n', 3]
, 2 + new
symbolic 3
contains ['+', 2, ['n', 3]]
.
Here is an example of the script which "calculates" the side of circumscribed octagon using the above package:
The value of $side is
- ['/', ['-', ['sqrt', ['+', 1, ['**', ['n', 1], 2]],
- undef], 1], ['n', 1]]
Note that while we obtained this value using a nice little script,
there is no simple way to use this value. In fact this value may
be inspected in debugger (see perldebug), but ony if
bareStringify
Option is set, and not via p
command.
If one attempts to print this value, then the overloaded operator
""
will be called, which will call nomethod
operator. The
result of this operator will be stringified again, but this result is
again of type symbolic
, which will lead to an infinite loop.
Add a pretty-printer method to the module symbolic.pm:
Now one can finish the script by
- print "side = ", $side->pretty, "\n";
The method pretty
is doing object-to-string conversion, so it
is natural to overload the operator ""
using this method. However,
inside such a method it is not necessary to pretty-print the
components $a and $b of an object. In the above subroutine
"[$meth $a $b]"
is a catenation of some strings and components $a
and $b. If these components use overloading, the catenation operator
will look for an overloaded operator .; if not present, it will
look for an overloaded operator ""
. Thus it is enough to use
Now one can change the last line of the script to
- print "side = $side\n";
which outputs
- side = [/ [- [sqrt [+ 1 [** [n 1 u] 2]] u] 1] [n 1 u]]
and one can inspect the value in debugger using all the possible methods.
Something is still amiss: consider the loop variable $cnt of the
script. It was a number, not an object. We cannot make this value of
type symbolic
, since then the loop will not terminate.
Indeed, to terminate the cycle, the $cnt should become false.
However, the operator bool
for checking falsity is overloaded (this
time via overloaded ""
), and returns a long string, thus any object
of type symbolic
is true. To overcome this, we need a way to
compare an object to 0. In fact, it is easier to write a numeric
conversion routine.
Here is the text of symbolic.pm with such a routine added (and slightly modified str()):
- package symbolic; # Primitive symbolic calculator
- use overload
- nomethod => \&wrap, '""' => \&str, '0+' => \#
- sub new { shift; bless ['n', @_] }
- sub wrap {
- my ($obj, $other, $inv, $meth) = @_;
- ($obj, $other) = ($other, $obj) if $inv;
- bless [$meth, $obj, $other];
- }
- sub str {
- my ($meth, $a, $b) = @{+shift};
- $a = 'u' unless defined $a;
- if (defined $b) {
- "[$meth $a $b]";
- } else {
- "[$meth $a]";
- }
- }
- my %subr = ( n => sub {$_[0]},
- sqrt => sub {sqrt $_[0]},
- '-' => sub {shift() - shift()},
- '+' => sub {shift() + shift()},
- '/' => sub {shift() / shift()},
- '*' => sub {shift() * shift()},
- '**' => sub {shift() ** shift()},
- );
- sub num {
- my ($meth, $a, $b) = @{+shift};
- my $subr = $subr{$meth}
- or die "Do not know how to ($meth) in symbolic";
- $a = $a->num if ref $a eq __PACKAGE__;
- $b = $b->num if ref $b eq __PACKAGE__;
- $subr->($a,$b);
- }
All the work of numeric conversion is done in %subr and num(). Of course, %subr is not complete, it contains only operators used in the example below. Here is the extra-credit question: why do we need an explicit recursion in num()? (Answer is at the end of this section.)
Use this module like this:
It prints (without so many line breaks)
- [/ [- [sqrt [+ 1 [** [/ [- [sqrt [+ 1 [** [n 1] 2]]] 1]
- [n 1]] 2]]] 1]
- [/ [- [sqrt [+ 1 [** [n 1] 2]]] 1] [n 1]]]=0.198912
- pi=3.182598
The above module is very primitive. It does not implement
mutator methods (++
, -=
and so on), does not do deep copying
(not required without mutators!), and implements only those arithmetic
operations which are used in the example.
To implement most arithmetic operations is easy; one should just use the tables of operations, and change the code which fills %subr to
- my %subr = ( 'n' => sub {$_[0]} );
- foreach my $op (split " ", $overload::ops{with_assign}) {
- $subr{$op} = $subr{"$op="} = eval "sub {shift() $op shift()}";
- }
- my @bins = qw(binary 3way_comparison num_comparison str_comparison);
- foreach my $op (split " ", "@overload::ops{ @bins }") {
- $subr{$op} = eval "sub {shift() $op shift()}";
- }
- foreach my $op (split " ", "@overload::ops{qw(unary func)}") {
- print "defining `$op'\n";
- $subr{$op} = eval "sub {$op shift()}";
- }
Due to Calling Conventions for Mutators, we do not need anything
special to make +=
and friends work, except filling +=
entry of
%subr, and defining a copy constructor (needed since Perl has no
way to know that the implementation of '+='
does not mutate
the argument, compare Copy Constructor).
To implement a copy constructor, add '=' => \&cpy
to use overload
line, and code (this code assumes that mutators change things one level
deep only, so recursive copying is not needed):
To make ++
and --
work, we need to implement actual mutators,
either directly, or in nomethod
. We continue to do things inside
nomethod
, thus add
after the first line of wrap(). This is not a most effective implementation, one may consider
instead.
As a final remark, note that one can fill %subr by
- my %subr = ( 'n' => sub {$_[0]} );
- foreach my $op (split " ", $overload::ops{with_assign}) {
- $subr{$op} = $subr{"$op="} = eval "sub {shift() $op shift()}";
- }
- my @bins = qw(binary 3way_comparison num_comparison str_comparison);
- foreach my $op (split " ", "@overload::ops{ @bins }") {
- $subr{$op} = eval "sub {shift() $op shift()}";
- }
- foreach my $op (split " ", "@overload::ops{qw(unary func)}") {
- $subr{$op} = eval "sub {$op shift()}";
- }
- $subr{'++'} = $subr{'+'};
- $subr{'--'} = $subr{'-'};
This finishes implementation of a primitive symbolic calculator in 50 lines of Perl code. Since the numeric values of subexpressions are not cached, the calculator is very slow.
Here is the answer for the exercise: In the case of str(), we need no
explicit recursion since the overloaded .-operator will fall back
to an existing overloaded operator ""
. Overloaded arithmetic
operators do not fall back to numeric conversion if fallback
is
not explicitly requested. Thus without an explicit recursion num()
would convert ['+', $a, $b]
to $a + $b
, which would just rebuild
the argument of num().
If you wonder why defaults for conversion are different for str() and num(), note how easy it was to write the symbolic calculator. This simplicity is due to an appropriate choice of defaults. One extra note: due to the explicit recursion num() is more fragile than sym(): we need to explicitly check for the type of $a and $b. If components $a and $b happen to be of some related type, this may lead to problems.
One may wonder why we call the above calculator symbolic. The reason is that the actual calculation of the value of expression is postponed until the value is used.
To see it in action, add a method
to the package symbolic
. After this change one can do
and the numeric value of $c becomes 5. However, after calling
- $a->STORE(12); $b->STORE(5);
the numeric value of $c becomes 13. There is no doubt now that the module symbolic provides a symbolic calculator indeed.
To hide the rough edges under the hood, provide a tie()d interface to the
package symbolic
(compare with Metaphor clash). Add methods
(the bug is described in BUGS). One can use this new interface as
Now numeric value of $c is 5. After $a = 12; $b = 5
the numeric value
of $c becomes 13. To insulate the user of the module add a method
Now
shows that the numeric value of $c follows changes to the values of $a and $b.
Ilya Zakharevich <ilya@math.mps.ohio-state.edu>.
When Perl is run with the -Do switch or its equivalent, overloading induces diagnostic messages.
Using the m command of Perl debugger (see perldebug) one can
deduce which operations are overloaded (and which ancestor triggers
this overloading). Say, if eq
is overloaded, then the method (eq
is shown by debugger. The method ()
corresponds to the fallback
key (in fact a presence of this method shows that this package has
overloading enabled, and it is what is used by the Overloaded
function of module overload
).
The module might issue the following warnings:
(W) The call to overload::constant contained an odd number of arguments. The arguments should come in pairs.
(W) You tried to overload a constant type the overload package is unaware of.
(W) The second (fourth, sixth, ...) argument of overload::constant needs to be a code reference. Either an anonymous subroutine, or a reference to a subroutine.
Because it is used for overloading, the per-package hash %OVERLOAD now has a special meaning in Perl. The symbol table is filled with names looking like line-noise.
For the purpose of inheritance every overloaded package behaves as if
fallback
is present (possibly undefined). This may create
interesting effects if some package is not overloaded, but inherits
from two overloaded packages.
Relation between overloading and tie()ing is broken. Overloading is triggered or not basing on the previous class of tie()d value.
This happens because the presence of overloading is checked too early, before any tie()d access is attempted. If the FETCH()ed class of the tie()d value does not change, a simple workaround is to access the value immediately after tie()ing, so that after this call the previous class coincides with the current one.
Needed: a way to fix this without a speed penalty.
Barewords are not covered by overloaded string constants.
This document is confusing. There are grammos and misleading language used in places. It would seem a total rewrite is needed.