perlhack - How to hack on Perl
This document explains how Perl development works. It includes details about the Perl 5 Porters email list, the Perl repository, the Perlbug bug tracker, patch guidelines, and commentary on Perl development philosophy.
If you just want to submit a single small patch like a pod fix, a test for a bug, comment fixes, etc., it's easy! Here's how:
The perl source is in a git repository. You can clone the repository with the following command:
- % git clone git://perl5.git.perl.org/perl.git perl
Hack, hack, hack.
You can run all the tests with the following commands:
- % ./Configure -des -Dusedevel
- % make test
Keep hacking until the tests pass.
Committing your work will save the change on your local system:
- % git commit -a -m 'Commit message goes here'
Make sure the commit message describes your change in a single sentence. For example, "Fixed spelling errors in perlhack.pod".
The next step is to submit your patch to the Perl core ticket system via email.
Assuming your patch consists of a single git commit, you can send it to perlbug with this command line:
- % git format-patch HEAD^1..HEAD
- % perlbug -s '[PATCH] `git log --pretty=format:%s HEAD^1..HEAD`' -f 0001-*.patch
The perlbug program will ask you a few questions about your email address and the patch you're submitting. Once you've answered them you can submit your patch.
The porters appreciate the time you spent helping to make Perl better. Thank you!
If you want to report a bug in Perl, you must use the perlbug command line tool. This tool will ensure that your bug report includes all the relevant system and configuration information.
To browse existing Perl bugs and patches, you can use the web interface at http://rt.perl.org/.
Please check the archive of the perl5-porters list (see below) and/or the bug tracking system before submitting a bug report. Often, you'll find that the bug has been reported already.
You can log in to the bug tracking system and comment on existing bug reports. If you have additional information regarding an existing bug, please add it. This will help the porters fix the bug.
The perl5-porters (p5p) mailing list is where the Perl standard distribution is maintained and developed. The people who maintain Perl are also referred to as the "Perl 5 Porters", or just the "porters".
A searchable archive of the list is available at http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/. There is also another archive at http://archive.develooper.com/perl5-porters@perl.org/.
The perl5-changes mailing list receives a copy of each patch that gets submitted to the maintenance and development branches of the perl repository. See http://lists.perl.org/list/perl5-changes.html for subscription and archive information.
All of Perl's source code is kept centrally in a Git repository at perl5.git.perl.org. The repository contains many Perl revisions from Perl 1 onwards and all the revisions from Perforce, the previous version control system.
For much more detail on using git with the Perl repository, please see perlgit.
You will need a copy of Git for your computer. You can fetch a copy of the repository using the git protocol:
- % git clone git://perl5.git.perl.org/perl.git perl
This clones the repository and makes a local copy in the perl directory.
If you cannot use the git protocol for firewall reasons, you can also clone via http, though this is much slower:
- % git clone http://perl5.git.perl.org/perl.git perl
You may access the repository over the web. This allows you to browse the tree, see recent commits, subscribe to RSS feeds for the changes, search for particular commits and more. You may access it at http://perl5.git.perl.org/perl.git. A mirror of the repository is found at http://github.com/mirrors/perl.
You can also choose to use rsync to get a copy of the current source tree for the bleadperl branch and all maintenance branches:
- % rsync -avz rsync://perl5.git.perl.org/perl-current .
- % rsync -avz rsync://perl5.git.perl.org/perl-5.12.x .
- % rsync -avz rsync://perl5.git.perl.org/perl-5.10.x .
- % rsync -avz rsync://perl5.git.perl.org/perl-5.8.x .
- % rsync -avz rsync://perl5.git.perl.org/perl-5.6.x .
- % rsync -avz rsync://perl5.git.perl.org/perl-5.005xx .
(Add the --delete
option to remove leftover files.)
To get a full list of the available sync points:
- % rsync perl5.git.perl.org::
If you have a commit bit, please see perlgit for more details on using git.
If you're planning to do more extensive work than a single small fix, we encourage you to read the documentation below. This will help you focus your work and make your patches easier to incorporate into the Perl source.
If you have a small patch to submit, please submit it via perlbug. You can also send email directly to perlbug@perl.org. Please note that messages sent to perlbug may be held in a moderation queue, so you won't receive a response immediately.
You'll know your submission has been processed when you receive an email from our ticket tracking system. This email will give you a ticket number. Once your patch has made it to the ticket tracking system, it will also be sent to the perl5-porters@perl.org list.
Patches are reviewed and discussed on the p5p list. Simple, uncontroversial patches will usually be applied without any discussion. When the patch is applied, the ticket will be updated and you will receive email. In addition, an email will be sent to the p5p list.
In other cases, the patch will need more work or discussion. That will happen on the p5p list.
You are encouraged to participate in the discussion and advocate for your patch. Sometimes your patch may get lost in the shuffle. It's appropriate to send a reminder email to p5p if no action has been taken in a month. Please remember that the Perl 5 developers are all volunteers, and be polite.
Changes are always applied directly to the main development branch, called "blead". Some patches may be backported to a maintenance branch. If you think your patch is appropriate for the maintenance branch, please explain why when you submit it.
If you are submitting a code patch there are several things that you can do to help the Perl 5 Porters accept your patch.
If you used git to check out the Perl source, then using git
format-patch
will produce a patch in a style suitable for Perl. The
format-patch command produces one patch file for each commit you
made. If you prefer to send a single patch for all commits, you can use
git diff
.
- % git co blead
- % git pull
- % git diff blead my-branch-name
This produces a patch based on the difference between blead and your
current branch. It's important to make sure that blead is up to date
before producing the diff, that's why we call git pull
first.
We strongly recommend that you use git if possible. It will make your life easier, and ours as well.
However, if you're not using git, you can still produce a suitable
patch. You'll need a pristine copy of the Perl source to diff against.
The porters prefer unified diffs. Using GNU diff
, you can produce a
diff like this:
- % diff -Npurd perl.pristine perl.mine
Make sure that you make realclean
in your copy of Perl to remove any
build artifacts, or you may get a confusing result.
As you craft each patch you intend to submit to the Perl core, it's important to write a good commit message. This is especially important if your submission will consist of a series of commits.
The first line of the commit message should be a short description without a period. It should be no longer than the subject line of an email, 50 characters being a good rule of thumb.
A lot of Git tools (Gitweb, GitHub, git log --pretty=oneline, ...) will only display the first line (cut off at 50 characters) when presenting commit summaries.
The commit message should include a description of the problem that the patch corrects or new functionality that the patch adds.
As a general rule of thumb, your commit message should help a programmer who knows the Perl core quickly understand what you were trying to do, how you were trying to do it, and why the change matters to Perl.
Your commit message should describe why the change you are making is important. When someone looks at your change in six months or six years, your intent should be clear.
If you're deprecating a feature with the intent of later simplifying another bit of code, say so. If you're fixing a performance problem or adding a new feature to support some other bit of the core, mention that.
Your commit message should describe what part of the Perl core you're changing and what you expect your patch to do.
While it's not necessary for documentation changes, new tests or trivial patches, it's often worth explaining how your change works. Even if it's clear to you today, it may not be clear to a porter next month or next year.
A commit message isn't intended to take the place of comments in your code. Commit messages should describe the change you made, while code comments should describe the current state of the code.
If you've just implemented a new feature, complete with doc, tests and well-commented code, a brief commit message will often suffice. If, however, you've just changed a single character deep in the parser or lexer, you might need to write a small novel to ensure that future readers understand what you did and why you did it.
Be sure to adequately comment your code. While commenting every line is unnecessary, anything that takes advantage of side effects of operators, that creates changes that will be felt outside of the function being patched, or that others may find confusing should be documented. If you are going to err, it is better to err on the side of adding too many comments than too few.
The best comments explain why the code does what it does, not what it does.
In general, please follow the particular style of the code you are patching.
In particular, follow these general guidelines for patching Perl sources:
8-wide tabs (no exceptions!)
4-wide indents for code, 2-wide indents for nested CPP #defines
Try hard not to exceed 79-columns
ANSI C prototypes
Uncuddled elses and "K&R" style for indenting control constructs
No C++ style (//) comments
Mark places that need to be revisited with XXX (and revisit often!)
Opening brace lines up with "if" when conditional spans multiple lines; should be at end-of-line otherwise
In function definitions, name starts in column 0 (return value is on previous line)
Single space after keywords that are followed by parens, no space between function name and following paren
Avoid assignments in conditionals, but if they're unavoidable, use extra paren, e.g. "if (a && (b = c)) ..."
"return foo;" rather than "return(foo);"
"if (!foo) ..." rather than "if (foo == FALSE) ..." etc.
If your patch changes code (rather than just changing documentation), you should also include one or more test cases which illustrate the bug you're fixing or validate the new functionality you're adding. In general, you should update an existing test file rather than create a new one.
Your test suite additions should generally follow these guidelines (courtesy of Gurusamy Sarathy <gsar@activestate.com>):
Know what you're testing. Read the docs, and the source.
Tend to fail, not succeed.
Interpret results strictly.
Use unrelated features (this will flush out bizarre interactions).
Use non-standard idioms (otherwise you are not testing TIMTOWTDI).
Avoid using hardcoded test numbers whenever possible (the EXPECTED/GOT found in t/op/tie.t is much more maintainable, and gives better failure reports).
Give meaningful error messages when a test fails.
Avoid using qx// and system() unless you are testing for them. If you do use them, make sure that you cover _all_ perl platforms.
Unlink any temporary files you create.
Promote unforeseen warnings to errors with $SIG{__WARN__}.
Be sure to use the libraries and modules shipped with the version being tested, not those that were already installed.
Add comments to the code explaining what you are testing for.
Make updating the '1..42' string unnecessary. Or make sure that you update it.
Test _all_ behaviors of a given operator, library, or function.
Test all optional arguments.
Test return values in various contexts (boolean, scalar, list, lvalue).
Use both global and lexical variables.
Don't forget the exceptional, pathological cases.
This works just like patching anything else, with one extra consideration.
Some core modules also live on CPAN and are maintained outside of the Perl core. When the author updates the module, the updates are simply copied into the core.
Modules in the cpan/ directory of the source tree are maintained outside of the Perl core. See that module's listing on documentation or its listing on http://search.cpan.org/ for more information on reporting bugs and submitting patches.
In contrast, modules in the dist/ directory are maintained in the core.
For changes significant enough to warrant a pod/perldelta.pod entry, the porters will greatly appreciate it if you submit a delta entry along with your actual change. Significant changes include, but are not limited to:
Adding, deprecating, or removing core features
Adding, deprecating, removing, or upgrading core or dual-life modules
Adding new core tests
Fixing security issues and user-visible bugs in the core
Changes that might break existing code, either on the perl or C level
Significant performance improvements
Adding, removing, or significantly changing documentation in the pod/ directory
Important platform-specific changes
Please make sure you add the perldelta entry to the right section
within pod/perldelta.pod. More information on how to write good
perldelta entries is available in the Style
section of
Porting/how_to_write_a_perldelta.pod.
New features and extensions to the language can be contentious. There is no specific set of criteria which determine what features get added, but here are some questions to consider when developing a patch:
Our goals include, but are not limited to:
Keep it fast, simple, and useful.
Keep features/concepts as orthogonal as possible.
No arbitrary limits (platforms, data sizes, cultures).
Keep it open and exciting to use/patch/advocate Perl everywhere.
Either assimilate new technologies, or build bridges to them.
All the talk in the world is useless without an implementation. In almost every case, the person or people who argue for a new feature will be expected to be the ones who implement it. Porters capable of coding new features have their own agendas, and are not available to implement your (possibly good) idea.
It's a cardinal sin to break existing Perl programs. New warnings can be contentious--some say that a program that emits warnings is not broken, while others say it is. Adding keywords has the potential to break programs, changing the meaning of existing token sequences or functions might break programs.
The Perl 5 core includes mechanisms to help porters make backwards incompatible changes more compatible such as the feature and deprecate modules. Please use them when appropriate.
Perl 5 has extension mechanisms, modules and XS, specifically to avoid the need to keep changing the Perl interpreter. You can write modules that export functions, you can give those functions prototypes so they can be called like built-in functions, you can even write XS code to mess with the runtime data structures of the Perl interpreter if you want to implement really complicated things.
Whenever possible, new features should be prototyped in a CPAN module before they will be considered for the core.
Is this something that only the submitter wants added to the language, or is it broadly useful? Sometimes, instead of adding a feature with a tight focus, the porters might decide to wait until someone implements the more generalized feature.
Radical rewrites of large chunks of the Perl interpreter have the potential to introduce new bugs.
The smaller and more localized the change, the better. Similarly, a series of small patches is greatly preferred over a single large patch.
A patch is likely to be rejected if it closes off future avenues of development. For instance, a patch that placed a true and final interpretation on prototypes is likely to be rejected because there are still options for the future of prototypes that haven't been addressed.
Good patches (tight code, complete, correct) stand more chance of going in. Sloppy or incorrect patches might be placed on the back burner until the pumpking has time to fix, or might be discarded altogether without further notice.
The worst patches make use of system-specific features. It's highly unlikely that non-portable additions to the Perl language will be accepted.
Patches which change behaviour (fixing bugs or introducing new features) must include regression tests to verify that everything works as expected.
Without tests provided by the original author, how can anyone else changing perl in the future be sure that they haven't unwittingly broken the behaviour the patch implements? And without tests, how can the patch's author be confident that his/her hard work put into the patch won't be accidentally thrown away by someone in the future?
Patches without documentation are probably ill-thought out or incomplete. No features can be added or changed without documentation, so submitting a patch for the appropriate pod docs as well as the source code is important.
Larry said "Although the Perl Slogan is There's More Than One Way to Do It, I hesitate to make 10 ways to do something". This is a tricky heuristic to navigate, though--one man's essential addition is another man's pointless cruft.
Work for the pumpking, work for Perl programmers, work for module authors, ... Perl is supposed to be easy.
Working code is always preferred to pie-in-the-sky ideas. A patch to add a feature stands a much higher chance of making it to the language than does a random feature request, no matter how fervently argued the request might be. This ties into "Will it be useful?", as the fact that someone took the time to make the patch demonstrates a strong desire for the feature.
The core uses the same testing style as the rest of Perl, a simple "ok/not ok" run through Test::Harness, but there are a few special considerations.
There are three ways to write a test in the core. Test::More,
t/test.pl and ad hoc print $test ? "ok 42\n" : "not ok 42\n"
. The
decision of which to use depends on what part of the test suite you're
working on. This is a measure to prevent a high-level failure (such as
Config.pm breaking) from causing basic functionality tests to fail.
The t/test.pl library provides some of the features of Test::More, but avoids loading most modules and uses as few core features as possible.
If you write your own test, use the Test Anything Protocol.
Since we don't know if require works, or even subroutines, use ad hoc tests for these two. Step carefully to avoid using the feature being tested.
Now that basic require() and subroutines are tested, you can use the t/test.pl library.
You can also use certain libraries like Config conditionally, but be sure to skip the test gracefully if it's not there.
Now that the core of Perl is tested, Test::More can and should be used. You can also use the full suite of core modules in the tests.
When you say "make test", Perl uses the t/TEST program to run the test suite (except under Win32 where it uses t/harness instead). All tests are run from the t/ directory, not the directory which contains the test. This causes some problems with the tests in lib/, so here's some opportunity for some patching.
You must be triply conscious of cross-platform concerns. This usually
boils down to using File::Spec and avoiding things like fork()
and system() unless absolutely necessary.
make test
targetsThere are various special make targets that can be used to test Perl slightly differently than the standard "test" target. Not all them are expected to give a 100% success rate. Many of them have several aliases, and many of them are not available on certain operating systems.
This runs some basic sanity tests on the source tree and helps catch basic errors before you submit a patch.
Run perl on all core tests (t/* and lib/[a-z]* pragma tests).
(Not available on Win32)
Run all the tests through B::Deparse. Not all tests will succeed.
(Not available on Win32)
Run all tests with the -t command-line switch. Not all tests are expected to succeed (until they're specifically fixed, of course).
(Not available on Win32)
Run miniperl on t/base, t/comp, t/cmd, t/run, t/io, t/op, t/uni and t/mro tests.
(Only in Linux) Run all the tests using the memory leak + naughty memory access tool "valgrind". The log files will be named testname.valgrind.
Run all the usual tests and some extra tests. As of Perl 5.8.0, the only extra tests are Abigail's JAPHs, t/japh/abigail.t.
You can also run the torture test with t/harness by giving
-torture
argument to t/harness.
Run all the tests with -Mutf8. Not all tests will succeed.
(Not available on Win32)
Runs the tests with UTF-16 encoded scripts, encoded with different versions of this encoding.
make utest.utf16
runs the test suite with a combination of -utf8
and -utf16
arguments to t/TEST.
(Not available on Win32)
Run the test suite with the t/harness controlling program, instead of t/TEST. t/harness is more sophisticated, and uses the Test::Harness module, thus using this test target supposes that perl mostly works. The main advantage for our purposes is that it prints a detailed summary of failed tests at the end. Also, unlike t/TEST, it doesn't redirect stderr to stdout.
Note that under Win32 t/harness is always used instead of t/TEST, so there is no special "test_harness" target.
Under Win32's "test" target you may use the TEST_SWITCHES and TEST_FILES environment variables to control the behaviour of t/harness. This means you can say
- nmake test TEST_FILES="op/*.t"
- nmake test TEST_SWITCHES="-torture" TEST_FILES="op/*.t"
Sets PERL_SKIP_TTY_TEST to true before running normal test.
The core distribution can now run its regression tests in parallel on
Unix-like platforms. Instead of running make test
, set TEST_JOBS
in your environment to the number of tests to run in parallel, and run
make test_harness
. On a Bourne-like shell, this can be done as
- TEST_JOBS=3 make test_harness # Run 3 tests in parallel
An environment variable is used, rather than parallel make itself,
because TAP::Harness needs to be able to schedule individual
non-conflicting test scripts itself, and there is no standard interface
to make
utilities to interact with their job schedulers.
Note that currently some test scripts may fail when run in parallel (most
notably ext/IO/t/io_dir.t
). If necessary, run just the failing scripts
again sequentially and see if the failures go away.
You can run part of the test suite by hand by using one of the following commands from the t/ directory:
- ./perl -I../lib TEST list-of-.t-files
or
- ./perl -I../lib harness list-of-.t-files
(If you don't specify test scripts, the whole test suite will be run.)
If you use harness
for testing, you have several command line options
available to you. The arguments are as follows, and are in the order
that they must appear if used together.
- harness -v -torture -re=pattern LIST OF FILES TO TEST
- harness -v -torture -re LIST OF PATTERNS TO MATCH
If LIST OF FILES TO TEST
is omitted, the file list is obtained from
the manifest. The file list may include shell wildcards which will be
expanded out.
Run the tests under verbose mode so you can see what tests were run, and debug output.
Run the torture tests as well as the normal set.
Filter the file list so that all the test files run match PATTERN. Note that this form is distinct from the -re LIST OF PATTERNS form below in that it allows the file list to be provided as well.
Filter the file list so that all the test files run match /(LIST|OF|PATTERNS)/. Note that with this form the patterns are joined by '|' and you cannot supply a list of files, instead the test files are obtained from the MANIFEST.
You can run an individual test by a command similar to
- ./perl -I../lib path/to/foo.t
except that the harnesses set up some environment variables that may affect the execution of the test:
indicates that we're running this test as part of the perl core test suite. This is useful for modules that have a dual life on CPAN.
is set to 2 if it isn't set already (see PERL_DESTRUCT_LEVEL in perlhacktips).
(used only by t/TEST) if set, overrides the path to the perl executable that should be used to run the tests (the default being ./perl).
if set, tells to skip the tests that need a terminal. It's actually set automatically by the Makefile, but can also be forced artificially by running 'make test_notty'.
Setting this variable runs all the Net::Ping modules tests, otherwise some tests that interact with the outside world are skipped. See perl58delta.
Setting this variable skips the vrexx.t tests for OS2::REXX.
This sets a variable in op/numconvert.t.
See also the documentation for the Test and Test::Harness modules, for more environment variables that affect testing.
To hack on the Perl guts, you'll need to read the following things:
An overview of the Perl source tree. This will help you find the files you're looking for.
An overview of the Perl interpreter source code and some details on how Perl does what it does.
This document walks through the creation of a small patch to Perl's C code. If you're just getting started with Perl core hacking, this will help you understand how it works.
More details on hacking the Perl core. This document focuses on lower level details such as how to write tests, compilation issues, portability, debugging, etc.
If you plan on doing serious C hacking, make sure to read this.
This is of paramount importance, since it's the documentation of what goes where in the Perl source. Read it over a couple of times and it might start to make sense - don't worry if it doesn't yet, because the best way to study it is to read it in conjunction with poking at Perl source, and we'll do that later on.
Gisle Aas's "illustrated perlguts", also known as illguts, has very helpful pictures:
A working knowledge of XSUB programming is incredibly useful for core hacking; XSUBs use techniques drawn from the PP code, the portion of the guts that actually executes a Perl program. It's a lot gentler to learn those techniques from simple examples and explanation than from the core itself.
The documentation for the Perl API explains what some of the internal functions do, as well as the many macros used in the source.
This is a collection of words of wisdom for a Perl porter; some of it is only useful to the pumpkin holder, but most of it applies to anyone wanting to go about Perl development.
This should be available from http://dev.perl.org/perl5/docs/p5p-faq.html . It contains hints on reading perl5-porters, information on how perl5-porters works and how Perl development in general works.
The CPAN testers ( http://testers.cpan.org/ ) are a group of volunteers who test CPAN modules on a variety of platforms.
Perl Smokers ( http://www.nntp.perl.org/group/perl.daily-build/ and http://www.nntp.perl.org/group/perl.daily-build.reports/ ) automatically test Perl source releases on platforms with various configurations.
Both efforts welcome volunteers. In order to get involved in smoke testing of the perl itself visit http://search.cpan.org/dist/Test-Smoke/. In order to start smoke testing CPAN modules visit http://search.cpan.org/dist/CPANPLUS-YACSmoke/ or http://search.cpan.org/dist/minismokebox/ or http://search.cpan.org/dist/CPAN-Reporter/.
If you've read all the documentation in the document and the ones listed above, you're more than ready to hack on Perl.
Here's some more recommendations
Subscribe to perl5-porters, follow the patches and try and understand them; don't be afraid to ask if there's a portion you're not clear on - who knows, you may unearth a bug in the patch...
Do read the README associated with your operating system, e.g. README.aix on the IBM AIX OS. Don't hesitate to supply patches to that README if you find anything missing or changed over a new OS release.
Find an area of Perl that seems interesting to you, and see if you can work out how it works. Scan through the source, and step over it in the debugger. Play, poke, investigate, fiddle! You'll probably get to understand not just your chosen area but a much wider range of perl's activity as well, and probably sooner than you'd think.
If you can do these things, you've started on the long road to Perl porting. Thanks for wanting to help make Perl better - and happy hacking!
If you recognized the quote about the Road above, you're in luck.
Most software projects begin each file with a literal description of each file's purpose. Perl instead begins each with a literary allusion to that file's purpose.
Like chapters in many books, all top-level Perl source files (along with a few others here and there) begin with an epigramic inscription that alludes, indirectly and metaphorically, to the material you're about to read.
Quotations are taken from writings of J.R.R. Tolkien pertaining to his Legendarium, almost always from The Lord of the Rings. Chapters and page numbers are given using the following editions:
The Hobbit, by J.R.R. Tolkien. The hardcover, 70th-anniversary edition of 2007 was used, published in the UK by Harper Collins Publishers and in the US by the Houghton Mifflin Company.
The Lord of the Rings, by J.R.R. Tolkien. The hardcover, 50th-anniversary edition of 2004 was used, published in the UK by Harper Collins Publishers and in the US by the Houghton Mifflin Company.
The Lays of Beleriand, by J.R.R. Tolkien and published posthumously by his son and literary executor, C.J.R. Tolkien, being the 3rd of the 12 volumes in Christopher's mammoth History of Middle Earth. Page numbers derive from the hardcover edition, first published in 1983 by George Allen & Unwin; no page numbers changed for the special 3-volume omnibus edition of 2002 or the various trade-paper editions, all again now by Harper Collins or Houghton Mifflin.
Other JRRT books fair game for quotes would thus include The Adventures of Tom Bombadil, The Silmarillion, Unfinished Tales, and The Tale of the Children of Hurin, all but the first posthumously assembled by CJRT. But The Lord of the Rings itself is perfectly fine and probably best to quote from, provided you can find a suitable quote there.
So if you were to supply a new, complete, top-level source file to add to Perl, you should conform to this peculiar practice by yourself selecting an appropriate quotation from Tolkien, retaining the original spelling and punctuation and using the same format the rest of the quotes are in. Indirect and oblique is just fine; remember, it's a metaphor, so being meta is, after all, what it's for.
This document was originally written by Nathan Torkington, and is maintained by the perl5-porters mailing list.