Takes a LIST of values and converts it into a string using the rules given by the TEMPLATE. The resulting string is the concatenation of the converted values. Typically, each converted value looks like its machine-level representation. For example, on 32-bit machines an integer may be represented by a sequence of 4 bytes which will be converted to a sequence of 4 characters.
The TEMPLATE is a sequence of characters that give the order and type of values, as follows:
- a A string with arbitrary binary data, will be null padded.
- A A text (ASCII) string, will be space padded.
- Z A null terminated (ASCIZ) string, will be null padded.
- b A bit string (ascending bit order inside each byte, like vec()).
- B A bit string (descending bit order inside each byte).
- h A hex string (low nybble first).
- H A hex string (high nybble first).
- c A signed char value.
- C An unsigned C char (octet) even under Unicode.
- s A signed short value.
- S An unsigned short value.
- (This 'short' is _exactly_ 16 bits, which may differ from
- what a local C compiler calls 'short'. If you want
- native-length shorts, use the '!' suffix.)
- i A signed integer value.
- I An unsigned integer value.
- (This 'integer' is _at_least_ 32 bits wide. Its exact
- size depends on what a local C compiler calls 'int',
- and may even be larger than the 'long' described in
- the next item.)
- l A signed long value.
- L An unsigned long value.
- (This 'long' is _exactly_ 32 bits, which may differ from
- what a local C compiler calls 'long'. If you want
- native-length longs, use the '!' suffix.)
- n An unsigned short in "network" (big-endian) order.
- N An unsigned long in "network" (big-endian) order.
- v An unsigned short in "VAX" (little-endian) order.
- V An unsigned long in "VAX" (little-endian) order.
- (These 'shorts' and 'longs' are _exactly_ 16 bits and
- _exactly_ 32 bits, respectively.)
- q A signed quad (64-bit) value.
- Q An unsigned quad value.
- (Quads are available only if your system supports 64-bit
- integer values _and_ if Perl has been compiled to support those.
- Causes a fatal error otherwise.)
- j A signed integer value (a Perl internal integer, IV).
- J An unsigned integer value (a Perl internal unsigned integer, UV).
- f A single-precision float in the native format.
- d A double-precision float in the native format.
- F A floating point value in the native native format
- (a Perl internal floating point value, NV).
- D A long double-precision float in the native format.
- (Long doubles are available only if your system supports long
- double values _and_ if Perl has been compiled to support those.
- Causes a fatal error otherwise.)
- p A pointer to a null-terminated string.
- P A pointer to a structure (fixed-length string).
- u A uuencoded string.
- U A Unicode character number. Encodes to UTF-8 internally
- (or UTF-EBCDIC in EBCDIC platforms).
- w A BER compressed integer (not an ASN.1 BER, see perlpacktut for
- details). Its bytes represent an unsigned integer in base 128,
- most significant digit first, with as few digits as possible. Bit
- eight (the high bit) is set on each byte except the last.
- x A null byte.
- X Back up a byte.
- @ Null fill to absolute position, counted from the start of
- the innermost ()-group.
- ( Start of a ()-group.
The following rules apply:
Each letter may optionally be followed by a number giving a repeat
count. With all types except a
, A
, Z
, b
, B
, h
,
H
, @
, x
, X
and P
the pack function will gobble up that
many values from the LIST. A *
for the repeat count means to use
however many items are left, except for @
, x
, X
, where it is
equivalent to 0
, and u
, where it is equivalent to 1 (or 45, what
is the same). A numeric repeat count may optionally be enclosed in
brackets, as in pack 'C[80]', @arr
.
One can replace the numeric repeat count by a template enclosed in brackets;
then the packed length of this template in bytes is used as a count.
For example, x[L]
skips a long (it skips the number of bytes in a long);
the template $t X[$t] $t unpack()s twice what $t unpacks.
If the template in brackets contains alignment commands (such as x![d]
),
its packed length is calculated as if the start of the template has the maximal
possible alignment.
When used with Z
, *
results in the addition of a trailing null
byte (so the packed result will be one longer than the byte length
of the item).
When used with @
, the repeat count represents an offset from the start
of the innermost () group.
The repeat count for u
is interpreted as the maximal number of bytes
to encode per line of output, with 0, 1 and 2 replaced by 45. The repeat
count should not be more than 65.
The a
, A
, and Z
types gobble just one value, but pack it as a
string of length count, padding with nulls or spaces as necessary. When
unpacking, A
strips trailing whitespace and nulls, Z
strips everything
after the first null, and a
returns data verbatim.
If the value-to-pack is too long, it is truncated. If too long and an
explicit count is provided, Z
packs only $count-1
bytes, followed
by a null byte. Thus Z
always packs a trailing null (except when the
count is 0).
Likewise, the b
and B
fields pack a string that many bits long.
Each character of the input field of pack() generates 1 bit of the result.
Each result bit is based on the least-significant bit of the corresponding
input character, i.e., on ord($char)%2. In particular, characters "0"
and "1"
generate bits 0 and 1, as do characters "\0"
and "\1"
.
Starting from the beginning of the input string of pack(), each 8-tuple
of characters is converted to 1 character of output. With format b
the first character of the 8-tuple determines the least-significant bit of a
character, and with format B
it determines the most-significant bit of
a character.
If the length of the input string is not exactly divisible by 8, the remainder is packed as if the input string were padded by null characters at the end. Similarly, during unpack()ing the "extra" bits are ignored.
If the input string of pack() is longer than needed, extra characters are
ignored. A *
for the repeat count of pack() means to use all the
characters of the input field. On unpack()ing the bits are converted to a
string of "0"
s and "1"
s.
The h
and H
fields pack a string that many nybbles (4-bit groups,
representable as hexadecimal digits, 0-9a-f) long.
Each character of the input field of pack() generates 4 bits of the result.
For non-alphabetical characters the result is based on the 4 least-significant
bits of the input character, i.e., on ord($char)%16. In particular,
characters "0"
and "1"
generate nybbles 0 and 1, as do bytes
"\0"
and "\1"
. For characters "a".."f"
and "A".."F"
the result
is compatible with the usual hexadecimal digits, so that "a"
and
"A"
both generate the nybble 0xa==10
. The result for characters
"g".."z"
and "G".."Z"
is not well-defined.
Starting from the beginning of the input string of pack(), each pair
of characters is converted to 1 character of output. With format h
the
first character of the pair determines the least-significant nybble of the
output character, and with format H
it determines the most-significant
nybble.
If the length of the input string is not even, it behaves as if padded by a null character at the end. Similarly, during unpack()ing the "extra" nybbles are ignored.
If the input string of pack() is longer than needed, extra characters are
ignored.
A *
for the repeat count of pack() means to use all the characters of
the input field. On unpack()ing the nybbles are converted to a string
of hexadecimal digits.
The p
type packs a pointer to a null-terminated string. You are
responsible for ensuring the string is not a temporary value (which can
potentially get deallocated before you get around to using the packed result).
The P
type packs a pointer to a structure of the size indicated by the
length. A NULL pointer is created if the corresponding value for p
or
P
is undef, similarly for unpack().
The / template character allows packing and unpacking of a sequence of
items where the packed structure contains a packed item count followed by
the packed items themselves.
For pack you write length-item/sequence-item and the
length-item describes how the length value is packed. The ones likely
to be of most use are integer-packing ones like n
(for Java strings),
w
(for ASN.1 or SNMP) and N
(for Sun XDR).
For pack, the sequence-item may have a repeat count, in which case
the minimum of that and the number of available items is used as argument
for the length-item. If it has no repeat count or uses a '*', the number
of available items is used.
For unpack an internal stack of integer arguments unpacked so far is
used. You write /sequence-item and the repeat count is obtained by
popping off the last element from the stack. The sequence-item must not
have a repeat count.
If the sequence-item refers to a string type ("A"
, "a"
or "Z"
),
the length-item is a string length, not a number of strings. If there is
an explicit repeat count for pack, the packed string will be adjusted to that
given length.
The length-item is not returned explicitly from unpack.
Adding a count to the length-item letter is unlikely to do anything
useful, unless that letter is A
, a
or Z
. Packing with a
length-item of a
or Z
may introduce "\000"
characters,
which Perl does not regard as legal in numeric strings.
The integer types s, S
, l
, and L
may be
immediately followed by a !
suffix to signify native shorts or
longs--as you can see from above for example a bare l
does mean
exactly 32 bits, the native long
(as seen by the local C compiler)
may be larger. This is an issue mainly in 64-bit platforms. You can
see whether using !
makes any difference by
i!
and I!
also work but only because of completeness;
they are identical to i
and I
.
The actual sizes (in bytes) of native shorts, ints, longs, and long longs on the platform where Perl was built are also available via Config:
(The $Config{longlongsize}
will be undefined if your system does
not support long longs.)
The integer formats s, S
, i
, I
, l
, L
, j
, and J
are inherently non-portable between processors and operating systems
because they obey the native byteorder and endianness. For example a
4-byte integer 0x12345678 (305419896 decimal) would be ordered natively
(arranged in and handled by the CPU registers) into bytes as
- 0x12 0x34 0x56 0x78 # big-endian
- 0x78 0x56 0x34 0x12 # little-endian
Basically, the Intel and VAX CPUs are little-endian, while everybody else, for example Motorola m68k/88k, PPC, Sparc, HP PA, Power, and Cray are big-endian. Alpha and MIPS can be either: Digital/Compaq used/uses them in little-endian mode; SGI/Cray uses them in big-endian mode.
The names `big-endian' and `little-endian' are comic references to the classic "Gulliver's Travels" (via the paper "On Holy Wars and a Plea for Peace" by Danny Cohen, USC/ISI IEN 137, April 1, 1980) and the egg-eating habits of the Lilliputians.
Some systems may have even weirder byte orders such as
- 0x56 0x78 0x12 0x34
- 0x34 0x12 0x78 0x56
You can see your system's preference with
The byteorder on the platform where Perl was built is also available via Config:
Byteorders '1234'
and '12345678'
are little-endian, '4321'
and '87654321'
are big-endian.
If you want portable packed integers use the formats n
, N
,
v
, and V
, their byte endianness and size are known.
See also perlport.
Real numbers (floats and doubles) are in the native machine format only; due to the multiplicity of floating formats around, and the lack of a standard "network" representation, no facility for interchange has been made. This means that packed floating point data written on one machine may not be readable on another - even if both use IEEE floating point arithmetic (as the endian-ness of the memory representation is not part of the IEEE spec). See also perlport.
Note that Perl uses doubles internally for all numeric calculation, and
converting from double into float and thence back to double again will
lose precision (i.e., unpack("f", pack("f", $foo)) will not in general
equal $foo).
If the pattern begins with a U
, the resulting string will be
treated as UTF-8-encoded Unicode. You can force UTF-8 encoding on in a
string with an initial U0
, and the bytes that follow will be
interpreted as Unicode characters. If you don't want this to happen,
you can begin your pattern with C0
(or anything else) to force Perl
not to UTF-8 encode your string, and then follow this with a U*
somewhere in your pattern.
You must yourself do any alignment or padding by inserting for example
enough 'x'
es while packing. There is no way to pack() and unpack()
could know where the characters are going to or coming from. Therefore
pack (and unpack) handle their output and input as flat
sequences of characters.
A ()-group is a sub-TEMPLATE enclosed in parentheses. A group may
take a repeat count, both as postfix, and for unpack() also via the /
template character. Within each repetition of a group, positioning with
@
starts again at 0. Therefore, the result of
- pack( '@1A((@2A)@3A)', 'a', 'b', 'c' )
is the string "\0a\0\0bc".
x
and X
accept !
modifier. In this case they act as
alignment commands: they jump forward/back to the closest position
aligned at a multiple of count
characters. For example, to pack() or
unpack() C's struct {char c; double d; char cc[2]}
one may need to
use the template W x![d] d W[2]
; this assumes that doubles must be
aligned on the double's size.
For alignment commands count
of 0 is equivalent to count
of 1;
both result in no-ops.
A comment in a TEMPLATE starts with #
and goes to the end of line.
White space may be used to separate pack codes from each other, but
a !
modifier and a repeat count must follow immediately.
If TEMPLATE requires more arguments to pack() than actually given, pack()
assumes additional ""
arguments. If TEMPLATE requires fewer arguments
to pack() than actually given, extra arguments are ignored.
Examples:
- $foo = pack("CCCC",65,66,67,68);
- # foo eq "ABCD"
- $foo = pack("C4",65,66,67,68);
- # same thing
- $foo = pack("W4",0x24b6,0x24b7,0x24b8,0x24b9);
- # same thing with Unicode circled letters.
- $foo = pack("U4",0x24b6,0x24b7,0x24b8,0x24b9);
- # same thing with Unicode circled letters.
- $foo = pack("ccxxcc",65,66,67,68);
- # foo eq "AB\0\0CD"
- # note: the above examples featuring "C" and "c" are true
- # only on ASCII and ASCII-derived systems such as ISO Latin 1
- # and UTF-8. In EBCDIC the first example would be
- # $foo = pack("CCCC",193,194,195,196);
- $foo = pack("s2",1,2);
- # "\1\0\2\0" on little-endian
- # "\0\1\0\2" on big-endian
- $foo = pack("a4","abcd","x","y","z");
- # "abcd"
- $foo = pack("aaaa","abcd","x","y","z");
- # "axyz"
- $foo = pack("a14","abcdefg");
- # "abcdefg\0\0\0\0\0\0\0"
- $foo = pack("i9pl", gmtime);
- # a real struct tm (on my system anyway)
- $utmp_template = "Z8 Z8 Z16 L";
- $utmp = pack($utmp_template, @utmp1);
- # a struct utmp (BSDish)
- @utmp2 = unpack($utmp_template, $utmp);
- # "@utmp1" eq "@utmp2"
- sub bintodec {
- unpack("N", pack("B32", substr("0" x 32 . shift, -32)));
- }
- $foo = pack('sx2l', 12, 34);
- # short 12, two zero bytes padding, long 34
- $bar = pack('s@4l', 12, 34);
- # short 12, zero fill to position 4, long 34
- # $foo eq $bar
The same template may generally also be used in unpack().